Article number: 00 207 06 99

Electronic wash basin tap MODUS E

Discontinued SSC SWS

HD-K - high-pressure cold water/pre-mixed water

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Remember Compare Redirect Datasheet

Find contact person on site

Scope of delivery

Infrared sensor single-hole tap

Vandal-resistant all-metal housing
6 V solenoid valve with pre-filter
Aerator
Infrared sensor electronics, programmable
Connection cable, 250 mm, with 3-pin plug connector, protection class IP65

Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
Fastening material for wash basin installation

Delivery data

Weight: 1,82 kg/Piece
Packing unit: 1

Technical data

Setting options via SWS SSC

Sensor range (short/medium/long)
Programming via short range reflex (off/on)
Max. flow time (1-360 s)
Follow-up time (0.6-60 s)
Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
Duration of flow (off/15-600 s)
Energy saving mode (off/1-254 h after last flush)
Cleaning stop (off/60-360 s)

Setting options via short range reflex

Sensor range (short/medium/long)
Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
Cleaning stop (off/60 s)

S_Durchfluss: max. 5 l/min pressure independent
Flow: 1.0 - 5.0 l/min
Max. Resting pressure: 8 bar
Max. operating temperature: 70 °C (80 °C for thermal disinfection)
Connection: G 3/8 IG
Material: Housing Brass, conform to German drinking water regulations
Surface: Chrome
Certificates: P-IX 19116/IZ
Noise class: I
Flow class: Z