WC module MONTUS
Scope of delivery
- WC module
- Pipe interrupter (DIN EN 12541)
- Cross bar with concealed COMPACT II flush valve, with isolating valve and flush-mounted cap, height-adjustable
- Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
- Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
- Fastening material for installation feet
Delivery data
- Weight: 12,30 kg/Piece
- Packing unit: 1
Technical data
- Flow pressure: 1.2 - 5.0 bar
- Max. Resting pressure: 8 bar
- Load capacity: max. 400 kg (when using MONTUS wall bracket set)
- Waste water connection: Ø 90 /110 mm
- Flush pipe connection: Ø 45 mm
- Water connection: DN 20 G 3/4 AG (right)
- Waste water outlet: Ø 90 /110 mm
- Flush flow: 1.0 - 1.3 l/s
- Material: Frame Steel; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
- Surface: Frame Powder coat finish
- Dimensions: W 50 cm x h 115 cm
- Certificates: Belgaqua
Necessary associated articles
- Built-in flush valve with noise class I at 100% flow rate.
- For electronic triggering, provide power supply in accordance with the respective WC control.
- When used with the SCHELL SWS water management system, use a standard bus cable H(St)H2x2x0.8 (provided on site) for the SWS BE-K wired bus extender as required.
- Always use original SCHELL mains adapters and connection cables.
- Required supply line DN 25
Low-noise concealed flush valve. For accepting SCHELL urinal control/operating...
Adjustable tilt angle. Vandal-resistant shower head, with soft stream and...
Mixed water, ThermoProtect thermostat
Triggering via CVD-Touch electronics with automatic closing. Battery operation....
Mixed water
For LINUS/LINUS Basic D-SC-M concealed shower fittings. Manual actuation with...