With stainless steel braided sleeving.

With COMFORT handle. Two outlets. According to DIN 3227.

With stainless steel braided sleeving and a rotatable connection line.

With stainless steel braided sleeving and a rotatable connection line.

WC module with concealed cistern 8 cm. For expansion, installation and conversion work in masonry. For wall-mounted WC with 180 or 230 mm fastening dimension. U-shaped, non-self-supporting, galvanised steel frame. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed urinal flush valve. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Central computer unit for setting up a water management system and control for water-saving drinking water hygiene. Access via PC, mobile device via web app or building management system. <br> • Networking of up to 64 participants (e.g. fittings) via cable or radio (meshwork). <br> • Participants can be individually parameterised centrally. <br> • Centrally controlled stagnation flush (simultaneous). <br> - At fixed intervals and on fixed dates. <br> - When a temperature is exceeded/fallen below. - Triggered by an external signal (BMS, switch, etc.).

Not suitable for drinking water.

Module for networking a solenoid valve for stagnation flush with the SWS server, wired. Transmits data between the solenoid valve and the SWS server.

For use with the SWS water management system. Connection cable between SWS BE-F wireless bus extender and infrared sensor electronics.

Module for linking an SWS subscriber to the SWS Server via a cabled network. Transfers data between SWS subscriber and SWS Server.

For integrating the SWS water management system with a central building control/automation system. Translates the SWS protocol into the BACnet IP/MSTP bus protocol. 2 seperate networks for the SWS and BACnet protocol. Data points can be chosen as required – subsequent upgrade possible to max. 2,500 data points without replacing hardware. Configuration accessible only via individual password.

For protection against unauthorised actuation. According to DIN 3227.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks.

Manual actuation with automatic closing. Easy flow time adjustment.

Low-noise concealed low-pressure flush valve. For combination with all SCHELL ND WC controls/operating panels. Conform to DIN EN 12541. Internal isolating valve.

Manual actuation with automatic closing. Easy flow time adjustment.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

All-metal design with brass push button. Conform to DIN EN 12541.

Single flush. Barrier-free. Vandal-resistant, zinc die-cast version. Triggering from front via operating panel. Triggering via operating button on support handle or possible via external switch.

Manual actuation with automatic closing. Easy flow time adjustment.

With COMFORT handle. According to DIN 3227.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.