For the wireless parametrisation of SSC-capable SCHELL fittings or for the optional extension of stagnation flushes. Access via SSC Bluetooth® app (can be downloaded from App Store, Play Store) and mobile Android or iOS devices. Usable as a tool for adjusting the fittings (module can then be removed). Or the module is left on the fitting (excepting VITUS shower fittings, SCHELLTRONIC urinal flush valves, and battery-operated PURIS E and VENUS E) and therefore enables stagnation flushes by weekday and by time of day. The last 64 stagnation flushes are stored and can be accessed via the app. This data can also be sent/exported via email as a CSV file if required. Access to the SSC Bluetooth® module is protected by an access code that can be changed individually.

Infrared sensor-controlled. Mains operation.

Infrared sensor-controlled. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Manual open/closed actuation.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Prepared for manual thermal disinfection. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• SSC Bluetooth® module
• Integrated rechargeable battery for date/time reserve power

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller with hot water restrictor
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• Transformer plug 6 VDC, 100-240 VAC, 50-60 Hz
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,48 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/closed exposed wash basin tap
• Operating button open/close
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Open/closed ceramic cartridge
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,38 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,96 kg/Piece
• Packing unit: 1

Technical data

• Wireless standard: Bluetooth® SMART
• Frequency band: 2,4 GHz
• Max. Range: 10 m (depending on installation site and building materials)

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 330 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 330 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Stainless steel
• Surface: Outlet Chrome; Front panel Brushed stainless steel
• Outlet: L 230 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm