For length compensation on large wash basins.

Dual flush. Actuation from top or from front. Vandal-resistant, zinc die-cast version.

Complete tap for subsequent installation. Frost-safe valve seat 200 mm from front edge of facade. Automatic ventilation of the inside pipe with each closing operation.

For WBD-SC-T concealed masterbox. Manual actuation with automatic closing.

Design: sieger design. Connecting set for wash basins.

According to DIN 3842 for compact radiators. Angled form.

For the wireless parametrisation of SSC-capable SCHELL fittings or for the optional extension of stagnation flushes. Access via SSC Bluetooth® app (can be downloaded from App Store, Play Store) and mobile Android or iOS devices. Usable as a tool for adjusting the fittings (module can then be removed). Or the module is left on the fitting (excepting VITUS shower fittings, SCHELLTRONIC urinal flush valves, and battery-operated PURIS E and VENUS E) and therefore enables stagnation flushes by weekday and by time of day. The last 64 stagnation flushes are stored and can be accessed via the app. This data can also be sent/exported via email as a CSV file if required. Access to the SSC Bluetooth® module is protected by an access code that can be changed individually.

Compact single-lever mixer tap with design lever.

According to DIN 3842 for compact radiators. Angled form, lockable/adjustable.

For WBD-E-T concealed masterbox. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For exposed installation with connection from above, below or sides. Prepared breakout fields for pipe penetration.

Infrared sensor-controlled. Battery operation.

Bistable 6 V solenoid valve for thermal disinfection with SCHELL SWS water management system. Solenoid valve can be retrofitted to the planned connection in the water path. Function: Hot water is routed to bypass the thermostatic valve. Selectable via SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Mains operation.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Shower connection at bottom. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Initial instruction included. System programming is carried out strictly according to on-site conditions. Installation and system functionality must be present and correct (water, cabling and power supply); if not, additional costs will be incurred.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For all XERIS E wash basin taps. 2 LEED points when used in the public sector. 6 LEED points when used in the private sector.

Manual actuation with automatic closing. Easy flow time adjustment.

Manual open/closed actuation.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Infrared sensor-controlled. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

The VITUS Bluetooth® module permits stagnation flushes by weekday and by time of day, as well as the triggering of thermal disinfections. Access to the SSC Bluetooth® module is protected by an access code that can be changed individually. These are documented and can be accessed. For the wireless parametrisation of SSC-capable VITUS fittings or for the optional extension of stagnation flushes. Access via SSC Bluetooth® app (can be downloaded from App Store, Play Store) and mobile Android or iOS devices.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from strong stainless steel with a high-quality, brushed finish. Manual actuation with automatic closing. Single-person assembly for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Manual actuation with automatic closing. Easy flow time adjustment.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Prepared for manual thermal disinfection. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Scope of delivery

• Extension

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 1,14 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for outside wall
• Anti-twist wall rosette with internal thread for inside wall
• Fastening material

Delivery data

• Weight: 1,56 kg/Piece
• Packing unit: 8

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC-V self-closing button with push sleeve
• Installation frame
• Fastening material

Delivery data

• Weight: 1,96 kg/Piece
• Packing unit: 1

Scope of delivery

2x Design angle valve EDITION (05 320 06 99)

• Designer angle valve
• Polished brass body
• Brass cover for actuation and outlet
• ASAG easy (Self-sealing connection thread)
• Grease chamber head part
• Push rod
• High-tensile brass cone compression connection with length compensation
• Rosette Ø 60 mm

1x Design siphon EDITION (01 429 06 99)

• Designer siphon
• Cleaning aperture with O-ring seal
• Plastic plunger
• Brass rosette with slide ring

Delivery data

• Weight: 2,31 kg/Set
• Packing unit: 1

Scope of delivery

• Radiator screw connection
• Union nut, annealed

Delivery data

• Weight: 0,43 kg/Piece
• Packing unit: 25

Scope of delivery

• SSC Bluetooth® module
• Integrated rechargeable battery for date/time reserve power

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever single-hole tap
• Single-lever mixer
• Single-lever mixer ceramic cartridge with adjustable hot water and flow limitation
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 440 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Radiator screw connection
• Union nut, annealed

Delivery data

• Weight: 0,21 kg/Piece
• Packing unit: 50

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Installation frame
• Fastening material

Delivery data

• Weight: 1,88 kg/Piece
• Packing unit: 1

Scope of delivery

• Installation frame
• Rubber cable bushing for exposed cable Ø 15 mm
• Fastening material

Delivery data

• Weight: 0,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor wall outlet tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve
• Isolating valve
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• Push rosette

Delivery data

• Weight: 1,22 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 6 V bistable with connecting nipple and pre-filter
• Connection cable

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• Transformer plug 6 VDC, 100-240 VAC, 50-60 Hz
• Fastening material for wash basin installation

Delivery data

• Weight: 1,71 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• 6 V solenoid valve with pre-filter
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,89 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,88 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Set
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II
• Flow regulator
• Fastening material for wash basin installation

Delivery data

• Weight: 0,98 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/closed exposed shower tap
• Operating button open/close
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• IsoBody housing
• Open/closed ceramic cartridge
• 2 backflow preventers (EN 1717: EB-type)
• Hand shower with anti-limescale knobs, 3-way adjustable
• Shower hose with anti-twist protection
• 2 S-connections and rosettes (depth-adjustable)
• Shower bar (stainless steel)
• Fastening material

Delivery data

• Weight: 3,52 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,39 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,15 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,45 kg/Piece
• Packing unit: 1

Scope of delivery

• SSC Bluetooth® module VITUS
• Integrated rechargeable battery for date/time reserve power

Delivery data

• Weight: 0,41 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,89 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Self-closing cartridge SC
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• Hand shower, 3-way adjustable and connection hose
• Slide bar
• Connection accessories with isolating valve(s), backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wall installation

Delivery data

• Weight: 9,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,08 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,66 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,84 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,45 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed wash basin tap
• SC self-closing button
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Self-closing cartridge SC II
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,67 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Mixed water operating button with push sleeve
• Installation frame with infrared sensor electronics, programmable
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,03 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,47 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,87 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,80 kg/Piece
• Packing unit: 1

Technical data

• Material: Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• extension by: 60 mm
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 IG

Technical data

• Material: Front panel Die-cast zinc
• Surface: Front panel Chrome
• Dimensions front plate: w 240 mm x h 162 mm x d 15 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Material: Actuation Brass; Front panel Brass
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 173 mm x h 281 mm x d 11.5 mm

Technical data

Design angle valve EDITION (05 320 06 99)

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 229/IA, ACS, NF
• Noise class: I
• Flow class: A

Design siphon EDITION (01 429 06 99)

• Material: Brass
• Surface: Chrome

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Brass
• Connection: DN 25 G 1 IG
• Outlet: DN 25 R 1 AG with ex worked thread

Technical data

• Wireless standard: Bluetooth® SMART
• Frequency band: 2,4 GHz
• Max. Range: 10 m (depending on installation site and building materials)

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Actuation Die-cast zinc; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29002/IO, DIN-DVGW, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Matt nickel
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 R 1/2 AG with ex worked thread

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Material: Actuation Brass; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 173 mm x h 281 mm x d 11.5 mm
• Protection class: IP65 (CVD touch electronics)

Technical data

• Material: Plastic
• Surface: Chrome

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-13 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (for thermal disinfection 80 °C max. 10 min./day)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 230 mm
• Connection: G 1/2 AG
• Certificates: P-IX 29862/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 28574/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19116/IZ, Belgaqua
• Noise class: I
• Flow class: Z

Technical data

• Flow: max. 0,35 gpm ≈ 1,3 l/min
• Connection: M 24 x 1 AG

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 19958/IO, dr, Watermark, WELS
• Noise class: I
• Flow class: O

Technical data

• Jet types: Soft, Vital, Power
• Max. operating temperature: 65 °C (for thermal disinfection 80 °C max. 10 min./day)
• Max. Outlet temperature: 38 - 43 °C adjustable
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome, Polished stainless steel
• length shower hose: 1500 mm
• length shower bar: 900 mm
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 330 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Wireless standard: Bluetooth® SMART
• Frequency band: 2,4 GHz
• Max. Range: 10 m (depending on installation site and building materials)

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Running time: 5 - 30 s
• Flow at 3 bar: 9 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 220 mm x h 1263 mm x d 70 mm
• length shower hose: 1500 mm
• length shower bar: 685 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38235/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Brass
• Surface: Outlet Chrome; Front panel Chrome
• Outlet: L 110 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38234/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Brass
• Surface: Outlet Chrome; Actuation Chrome; Front panel Chrome
• Outlet: L 170 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19116/IZ, Belgaqua
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua