With COMFORT handle and grease chamber head part.

Solenoid valve can be retrofitted to the planned connection in a water path. Function: Hot water is routed to bypass the thermostatic valve. Selection is made by using the on-site connection (central building control system, key switch, etc.).

For connecting single-hole taps and an additional appliance connection to the cold/hot water connection.

With stainless steel braided sleeving and a rotatable connection line.

Infrared sensor-controlled. Additional single-lever operation. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed urinal flush valve. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Kit for conduit installation during preliminary building work. Frost-safe valve seat in masonry for wall thicknesses of 200-500 mm.

As an extension adapter if QUICK adapter installed too deep with QUICK connector on both sides. With socket for plug element at 30° pitch.

For LINUS/LINUS Basic D-SC-M concealed shower fittings. Manual actuation with automatic closing. With sealed housing bushings and internal isolating valve.

For integrating the SWS water management system with a central building control/automation system. Translates the SWS protocol into the BACnet IP/MSTP bus protocol. 2 seperate networks for the SWS and BACnet protocol. Data points can be chosen as required – subsequent upgrade possible to max. 2,500 data points without replacing hardware. Configuration accessible only via individual password.

For angle valves with push rod.

All-metal design with brass push button. Conform to DIN EN 12541. Single flush.

One end with Ø 18 mm flange for G 1/2 union nut, other end smooth.

Head part with 270° lever handle, open/closed.

With stainless steel braided sleeving.

With COMFORT handle.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,32 kg/Piece
• Packing unit: 40

Delivery data

• Weight: 0,009 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 12 V monostable with connecting nipple and pre-filter
• Adapter cable

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

Combination angle valve COMFORT (03 545 06 99)

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Angle valve with regulating function COMFORT (04 917 06 99)

• Angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,49 kg/Set
• Packing unit: 20

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter

Delivery data

• Weight: 3,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V

Delivery data

• Weight: 0,84 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for inside wall
• Anti-twist wall rosette with internal thread for outside wall
• Fastening material

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 8

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 1

Scope of delivery

• Masterbox
• Roughing-in housing
• Concealed shower tap with 2 isolating valves
• Self-closing cartridge SC II with hot water restrictor
• 2 pre-filters
• 2 backflow preventers (EN 1717: EB-type)
• Flushing nozzle
• Flush-mounted cap

Delivery data

• Weight: 1,91 kg/Piece
• Packing unit: 1

Scope of delivery

• Gateway with web interface
• ARM9 processor
• LED status indicators
• Rugged metal housing for top hat rail installation
• RS-232/RS-485 interfaces
• 2x RJ45 LAN interface, 10/100 Mbps
• Preinstalled German and English language packs

Delivery data

• Weight: 0,55 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,008 kg/Piece
• Packing unit: 10

Scope of delivery

• Exposed WC flush valve
• Self-closing cartridge with automatic nozzle cleaning needle
• Push rosette Ø 60 mm
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 1,02 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 10

Scope of delivery

• Draw-off valve
• Aerator

Delivery data

• Weight: 0,27 kg/Piece
• Packing unit: 10

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Inclined-seat valve
• COMFORT handle
• High-tensile brass cone compression connection
• Brass compression fitting

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 100

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,72 kg/Piece
• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: PA-IX 2850/IA, ACS
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Flow: max. 1,5 gpm ≈ 5,7 l/min

Technical data

Combination angle valve COMFORT (03 545 06 99)

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: PA-IX 2850/IA, ACS
• Noise class: I, at 100% flow
• Flow class: A

Angle valve with regulating function COMFORT (04 917 06 99)

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, NF, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Surface: Connection Chrome
• length: 150 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Flush time (1-15 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Pre-flush (off/1 s, lockout time 5-60 min after last flush)
• Automatic stadium program (off/1 s per user, main flush 20-60s after last use)
• Trap flushing (off/1-240 h after last flush)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Pre-flush (off/1 s)
• Automatic stadium program (off/1 s per user)
• Rap flush (off/on)
• Flush time (1-15 s)
• Material: Front panel Stainless steel
• Surface: Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: P-IX 19319/II
• Noise class: II

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• extension by: 20 mm
• Connection: QUICK plug-in technology DN 15
• Outlet: QUICK plug-in technology DN 15

Technical data

• Running time: 5 - 30 s
• Flow at 3 bar: 10 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Plastic; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Dimensions: w 138 mm x h 149 mm x d 120 mm
• Installation depth: 80 - 104 mm
• Connection: 2x G 1/2 IG
• Outlet: G 1/2 IG
• Certificates: P-IX 19960/IB, DIN-DVGW, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Data points: 200
• Dimensions: w 48 mm x h 100 mm x d 70 mm
• Input: 12 - 24 VAC

Technical data

• Material: Brass
• Surface: Chrome
• Connection: DN 10 G 3/8 AG

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Single flush: 4.5 - 9.0 l
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm
• Certificates: PA-IX 9901/II, DIN-DVGW, Belgaqua
• Noise class: II, at 100% flow

Technical data

• Surface: Chrome
• length: 1000 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: ACS

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Brass compression fitting Ø 12 (DN 10 G 3/8 AG)
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 018/IA, ACS, KIWA, NF
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O