Vandal-resistant shower head, with adjustable tilt angle. Angled version minimises likelihood of use for suicide.

For attaching MONTUS modules for exposed installation. Tool-less depth adjustment with 3 mm thread grid.

Kit for conduit installation during preliminary building work. Frost-safe valve seat in masonry for wall thicknesses of 200-500 mm.

Temperature contact sensor for use with SWS water management system. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Additional single-lever operation. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For SCHELL COMPACT II concealed urinal flush valve.

Delivery data

• Weight: 1,11 kg/Piece
• Packing unit: 1

Scope of delivery

• 2 wall brackets
• 2 thread detent pins for depth adjustment
• Fastening material

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for inside wall
• Anti-twist wall rosette with internal thread for outside wall
• Fastening material

Delivery data

• Weight: 1,92 kg/Piece
• Packing unit: 8

Scope of delivery

• PT1000 temperature sensor with cable
• Tube clamp Ø max. 110 mm (approx.)

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V

Delivery data

• Weight: 3,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,82 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer operating panel
• Operating button
• Self-closing cartridge with nozzle bore pre-filter
• Installation frame
• Fastening material

Delivery data

• Weight: 0,60 kg/Piece
• Packing unit: 1

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Tilt angle: 14 - 26 °
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Plastic
• depth setting range: 150 - 210 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Cable: 2x 0.14 mm², 3,000 mm long

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flush volume adjustable: 1.0 - 6.0 l
• Material: Actuation Die-cast zinc; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm