Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,32 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,51 kg/Piece
• Packing unit: 1

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua
• Noise class: I
• Flow class: O