PT1000 temperature sensor for use with SWS water management system to measure outlet temperature in LINUS fittings. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Battery operation.

Scope of delivery

• Temperature sensor PT 1000 with cable, connecting plug and O-ring seal

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• Flexible connection hose, G 3/8 IG x 450 mm, with pre-filter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Fastening material for wash basin installation

Delivery data

• Weight: 1,69 kg/Piece
• Packing unit: 1

Technical data

• Cable: 2x 0.14 mm², 500 mm long
• Material: Plug Stainless steel 1.4404; Sensor Stainless steel 1.4404
• Connection: G 1/2 AG

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O