With SECUR COMFORT handle, lockable. For protection against the unauthorised withdrawal of water.

With stainless steel braided sleeving and a rotatable connection line.

With stainless steel braided sleeving and a rotatable connection line.

Infrared sensor-controlled. Additional single-lever operation. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

For use with the SWS water management system. Connection cable between SWS BE-F wireless bus extender and infrared sensor electronics.

For use with the SWS water management system. Connection cable between SWS BE-F wireless bus extender and infrared sensor electronics.

For integrating the SWS water management system with a central building control/automation system. Translates the SWS protocol into the BACnet IP/MSTP bus protocol. 2 seperate networks for the SWS and BACnet protocol. Data points can be chosen as required – subsequent upgrade possible to max. 2,500 data points without replacing hardware. Configuration accessible only via individual password.

According to DIN 3227.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For the space-saving connection of household appliances.

With COMFORT handle and grease chamber head part. Safety combination (EN 1717).

With stainless steel braided sleeving.

Scope of delivery

• Draw-off valve
• Lockable COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Anti-vacuum device (EN 1717: HB-type)
• Grease chamber head part
• Hose screw connection
• Rosette Ø 54 mm (depth 3 mm)
• 2 keys

Delivery data

• Weight: 0,41 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 50 (loosely packed)

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter

Delivery data

• Weight: 3,63 kg/Piece
• Packing unit: 1

Scope of delivery

• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Adapter cable, approx. 250 mm, with 3-pin plug connector

Delivery data

• Weight: 0,17 kg/Piece
• Packing unit: 1

Scope of delivery

• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Adapter cable, approx. 250 mm, with 3-pin plug connector

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Scope of delivery

• Gateway with web interface
• ARM9 processor
• LED status indicators
• Rugged metal housing for top hat rail installation
• RS-232/RS-485 interfaces
• 2x RJ45 LAN interface, 10/100 Mbps
• Preinstalled German and English language packs

Delivery data

• Weight: 0,55 kg/Piece
• Packing unit: 1

Scope of delivery

• Inclined-seat valve
• COMFORT handle
• High-tensile brass cone compression connection
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 5

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• COMFORT handle
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 50

Scope of delivery

• Draw-off valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Anti-vacuum device (EN 1717: HB-type)
• Grease chamber head part
• Hose screw connection
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,36 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 20

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: PA-IX 28171/I, DIN-DVGW, ACS, Belgaqua, SVGW
• Noise class: I, at 100% flow

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 8 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG with pre-assembled seal

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG with pre-assembled seal
• Certificates: DVGW

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Data points: 200
• Dimensions: w 48 mm x h 100 mm x d 70 mm
• Input: 12 - 24 VAC

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 018/IA, ACS, KIWA, NF
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 20 G 3/4 AG
• Certificates: P-IX 229/IA, ACS
• Noise class: I
• Flow class: A

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: PA-IX 28171/I, DIN-DVGW, ACS, Belgaqua, SVGW
• Noise class: I, at 100% flow

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm