With stainless steel braided sleeving and a rotatable connection line.

For supplying power to 1-12 CVD-Touch and/or infrared sensor electronics. Suitable for all SSC- and SWS-capable fittings.

With stainless steel braided sleeving and a rotatable connection line.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Shower connection at bottom. Integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system. Configurable via SCHELL Single Control SSC.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed urinal flush valve. Intended for networking with the SCHELL SWS water management system. Power supply via SWS or mains adapter (together with BE-F wireless bus extender).

With stainless steel braided sleeving.

With stainless steel braided sleeving.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Manual actuation with automatic closing. Easy flow time adjustment.

Brass cone compression connection.

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

• Concealed mains adapter
• Adapter cable

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Electronic self-closing exposed shower tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,30 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Installation frame with infrared sensor electronics, programmable

Delivery data

• Weight: 0,64 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,59 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed wash basin tap
• SC self-closing button
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Self-closing cartridge SC II
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,08 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 25

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, Union nut G 3/8 IG with pre-assembled seal

Technical data

• Input: 100 - 240 VAC, 50 - 60 Hz
• Output: 9 VDC, 0.66 A

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG with pre-assembled seal
• Certificates: DVGW

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 28574/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Flush time (1-15 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Pre-flush (off/1 s, lockout time 5-60 min after last flush)
• Automatic stadium program (off/1 s per user, main flush 20-60s after last use)
• Trap flushing (off/1-240 h after last flush)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Pre-flush (off/1 s)
• Automatic stadium program (off/1 s per user)
• Rap flush (off/on)
• Flush time (1-15 s)
• Material: Front panel Plastic
• Surface: Front panel Alpine white
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG
• Certificates: DVGW

Technical data

• Surface: Connection Chrome
• length: 500 mm
• Connection: Union nut G 1/2 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38234/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 16, DN 20 G 3/4 IG