With stainless steel braided sleeving.

For drawing off drinking water samples (DIN ISO 19458).

According to DIN 3227.

PT1000 temperature sensor for use with SWS water management system to measure outlet temperature in LINUS fittings. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

With stainless steel braided sleeving.

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Cranked sampling pipe with union nut

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Polished brass body
• Push rod
• Push rosette Ø 60 mm

Delivery data

• Weight: 0,19 kg/Piece
• Packing unit: 1

Scope of delivery

• Temperature sensor PT 1000 with cable, connecting plug and O-ring seal

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,44 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20 (loosely packed)

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel
• Connection: G 3/4 IG

Technical data

• Material: Brass, conform to German drinking water regulations; Actuation Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG
• Certificates: P-IX 212/IA, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Cable: 2x 0.14 mm², 500 mm long
• Material: Plug Stainless steel 1.4404; Sensor Stainless steel 1.4404
• Connection: G 1/2 AG

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Elbow with union nut G 3/8 IG and pre-assembled seal, Union nut G 3/8 IG with pre-assembled seal