With stainless steel braided sleeving and a rotatable connection line.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For building sealing of SCHELL masterboxes according to DIN 18534.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

With stainless steel braided sleeving.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

High-tensile brass cone compression connection with length compensation.

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• T-screw connection
• 3 compression connections

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 25

Scope of delivery

• Expansion sleeve
• Adhesive tape

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 1

Scope of delivery

Angle valve thermostat (09 414 06 99)

• Angle valve thermostat
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters

Connecting set for angle valve thermostat (04 116 06 99)

• T-piece with movable union nut G 3/8 IG
• Flexible Clean-Flex S hose with union nuts.

Delivery data

• Weight: 0,83 kg/Set
• Packing unit: 1

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,87 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Length compensation piece (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 25

Technical data

• Surface: Connection Chrome
• length: 150 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x Ø 8 mm (DN 10 G 3/8 AG)

Technical data

• Dimensions: w 267 mm x h 280 mm
• Certificates: KIWA

Technical data

Angle valve thermostat (09 414 06 99)

• Material: Cover cap Plastic; Housing Brass, conform to German drinking water regulations
• Thermal disinfection: possible, after releasing the temperature lock
• Flow at 3 bar: 13 l/min
• Max. operating temperature: 63 °C (70 °C for a short time for thermal disinfection)
• Max. Outlet temperature: 33 - 50 °C adjustable (38 °C ± 2 K )
• Surface: Chrome
• Connection: G 3/8 IG, G 3/8 AG
• Outlet: G 3/8 AG
• Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS
• Noise class: I, at 100% flow

Connecting set for angle valve thermostat (04 116 06 99)

• Surface: Chrome
• Connection: G 3/8 IG

Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS

Noise class: I, at 100% flow

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• Connection: Union nut G 3/8 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 10, DN 10 G 3/8 IG