Filters out undesirable peaks from non-VDE electrical installations to prevent malfunctions in CVD-Touch electronics.

With stainless steel braided sleeving and a rotatable connection line.

WC module with concealed cistern 8 cm. For expansion, installation and conversion work in masonry. For wall-mounted WC with 180 or 230 mm fastening dimension. U-shaped, non-self-supporting, galvanised steel frame. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

For LINUS Basic D-C-V concealed shower fitting. Electronic actuation. With sealed housing bushings and internal isolating valve.

Extension when installation of the concealed WBW-SC-M masterbox is too deep.

For building sealing of SCHELL masterboxes according to DIN 18534.

Manual open/closed actuation. Shower connection at bottom.

For exposed connections from above.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Extension cable to connect the LC sensor and COMPACT LC urinal control where the installation is some distance away.

With stainless steel braided sleeving.

Head part for size 6 square spanner. HD safety combination (EN 1717).

For SCHELL COMPACT II concealed WC flush valve. Dual flush.

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

• WC module
• WC concealed cistern 8 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Plaster base mat
• Fastening material for wall installation

Delivery data

• Weight: 7,36 kg/Piece
• Packing unit: 1

Scope of delivery

• Masterbox
• Roughing-in housing
• Concealed shower tap with isolating valve
• 6 V solenoid valve
• Pre-filter
• Backflow preventer (EN 1717: EB-type)
• Flushing nozzle
• Flush-mounted cap

Delivery data

• Weight: 1,79 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,68 kg/Piece
• Packing unit: 1

Scope of delivery

• Expansion sleeve
• Adhesive tape

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever exposed shower tap
• Single-lever mixer
• Single-lever mixing ceramic cartridge with hot water and flow restrictor
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 3,99 kg/Piece
• Packing unit: 1

Scope of delivery

• 2 high-tensile brass cone compression connections with length compensation
• 2 union nuts
• 2 copper pipes Ø 16 mm

Delivery data

• Weight: 0,53 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,32 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 20

Scope of delivery

• Draw-off valve
• Backflow preventer (EN 1717: EB-type)
• Anti-vacuum device (EN 1717: HB-type)
• Hose screw connection

Delivery data

• Weight: 0,35 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer operating panel
• Operating buttons for economy/main flush
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame

Delivery data

• Weight: 0,69 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 6/7 l adjustable (6 l factory setting)
• Material: Frame Steel
• Surface: Frame Galvanised
• Dimensions: w 46 cm x h 78 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (top)
• Certificates: Belgaqua

Technical data

• Flow at 3 bar: 15 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Plastic; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Dimensions: w 138 mm x h 149 mm x d 140 mm
• Installation depth: 100 - 124 mm
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 G 1/2 IG
• Certificates: P-IX 18001/IA, Belgaqua
• Noise class: I
• Flow class: A

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 50 mm

Technical data

• Dimensions: w 254 mm x h 370 mm
• Certificates: KIWA

Technical data

• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38242/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Surface: Chrome
• length: 500 mm
• Connection: G 3/4 IG
• Outlet: G 1/2 IG

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• length: 2.5 m

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: PA-IX 28174/I, DIN-DVGW, Belgaqua
• Noise class: I, at 100% flow

Technical data

• Dual flush: Economy flush volume 3 l, Main 4.5 - 9.0 l
• Material: Plastic
• Surface: Alpine white; Front panel Alpine white
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm