Electronic wash basin tap MODUS E
Exposed wash basin tap VITUS VW-C-T
HD-M - high-pressure mixed water
Mixed water, ThermoProtect thermostat
Article number
Infrared sensor-controlled. Battery operation.
Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller with hot water restrictor
    • Infrared sensor electronics, programmable
    • 6 V solenoid valve with pre-filter
    • Aerator
    • Connection cable, 200 mm, with 2-pin plug, protection class IP65
    • 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
  • 6 V battery compartment, protection class IP65
  • 4x AA alkaline battery 1.5 V
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,86 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Electronic self-closing exposed wash basin tap
    • ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
    • CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
    • SWS BE-F VITUS wireless bus extender
    • Solenoid valve 6 V for carrying out thermal disinfection with SWS (in accordance with DVGW worksheet W 551)
    • 6 V solenoid valve with pre-filter
    • 2 backflow preventers (EN 1717: EB-type)
    • Pivoting outlet (lockable) with flow regulator
    • 6 V battery compartment (integrated)
  • 4x AA alkaline battery 1.5 V
  • 2 S-connections and rosettes (depth-adjustable)

Delivery data

  • Weight: 5,32 kg/Piece
  • Packing unit: 1

Technical data

  • Setting options via short range reflex
    • Sensor range area (approx. 2-17 cm)
    • Stagnation flush (off/duration of flow 30 s, 24 h after last use)
    • Cleaning stop (off/120 s)
  • Flow: max. 1 gpm ≈ 3,8 l/min
  • Flow pressure: 0.5 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: P-IX 29853/IO, WRAS applied
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Actuation force (soft/medium/hard)
    • Manual programming (off/on)
    • Max. flow time (1-950 s)
    • Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
    • Actuation timeout (off/1-255 s, timeout 1-2000 min)
  • Setting options via manual programming
    • Max. flow time (4-120 s, 10 program stages)
    • Stagnation flush (off/20 s, every 24 h)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Projection to centre of aerator: 270 mm
  • Connection: 2x DN 15 G 1/2 AG
  • Certificates: PA-IX 28575/IO, Belgaqua
  • Noise class: I
  • Flow class: O
Filter categories
Connection
3/8"
1/2"
Temperature
Mixed water
Thermostat (incl. scald protection)
Finish
Chrome
Chrome
Pressure
High pressure / standard pressure
High pressure / standard pressure
Noises
Noise class 1
-
Equipment
Filter,
Backflow preventer
Backflow preventer
Safety class
EB
-
Function
Contact-free,
Self-closing electronic
Self-closing electronic
Hygiene
Stagnation flush
Stagnation flush,
Therm. disinfection
Energy supply
Battery mode
Battery mode
System solutions
-
SWS Water Management System,
Single Control SSC
Watersaving
-
Start/stop function
2