With COMFORT handle. PT 1000 temperature sensor. Used with the SWS water management system. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender. According to DIN 3227.

Expansion module for retrofitting a temperature control to the PURIS E/VENUS E wash basin taps.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For all SCHELL wash basin taps PURIS, VENUS, CELIS, MODUS and PETIT. Not suitable for low pressure taps.

Extension 40 mm, non-rising spindle.

Scope of delivery

• COMFORT PT angle valve
• COMFORT handle
• PT1000 wired temperature sensor
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• 4 plastic clips for fastening the sensor cable

Delivery data

• Weight: 0,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Pull rod assembly, fitting feedthrough and drain set

Delivery data

• Weight: 0,64 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,37 kg/Piece
• Packing unit: 1

Scope of delivery

• Aerator with chrome sleeve
• Seal

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Technical data

• Cable: 2x 0.14 mm², 1,000 mm long
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: ACS

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 1 gpm ≈ 3,8 l/min
• Surface: Chrome
• Connection: M 24 x 1 AG

Technical data

• Material: Brass
• Surface: Chrome