T-piece with union nut for quick installation.

Infrared sensor-controlled. Additional single-lever operation. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

Covered valve actuation. According to DIN 3227.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Connection from rear or, with optional mounting frame, from top, bottom or sides.

For WBD-E-T concealed masterbox. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For drawing off drinking water samples (DIN ISO 19458). Actuation of angle valve under cover cap.

For use with the SWS water management system. Connection cable between SWS BE-F wireless bus extender and infrared sensor electronics.

Outlet with high-tensile brass cone compression connection.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Shower connection at bottom. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

One end with Ø 14 mm flange for G 3/8 union nut, other end with Ø 18 mm flange for G 1/2 union nut.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

High-tensile brass cone compression connection with length compensation.

Scope of delivery

• Water meter angle valve
• Union nut G 3/4 IG, with sealing device
• Long push rod
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,34 kg/Piece
• Packing unit: 25

Scope of delivery

• T-piece

Delivery data

• Weight: 0,21 kg/Piece
• Packing unit: 25

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter

Delivery data

• Weight: 3,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Polished brass body
• Cover for actuation
• Push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 60 mm

Delivery data

• Weight: 0,22 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Waterpath with 6 V solenoid valve
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,85 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Installation frame
• Fastening material

Delivery data

• Weight: 1,88 kg/Piece
• Packing unit: 1

Scope of delivery

• Sampling angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• Cranked sampling pipe with union nut
• Cap with chain

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 20

Scope of delivery

• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Adapter cable, approx. 250 mm, with 3-pin plug connector

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 20

Scope of delivery

• Elbow screw connection
• Long push rod
• High-tensile brass cone compression connection
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 25

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,29 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

Angle valve thermostat (09 414 06 99)

• Angle valve thermostat
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters

Connecting set for angle valve thermostat (04 116 06 99)

• T-piece with movable union nut G 3/8 IG
• Flexible Clean-Flex S hose with union nuts.

Delivery data

• Weight: 0,83 kg/Set
• Packing unit: 1

Scope of delivery

• Union nut
• Length compensation piece (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 25

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 20 G 3/4 IG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 AG (bottom), DN 20 G 1/2 IG (right)

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Plastic; Waterpath Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 190 mm
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Material: Actuation Brass; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 173 mm x h 281 mm x d 11.5 mm
• Protection class: IP65 (CVD touch electronics)

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), G 3/4 AG
• Certificates: DVGW, ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 IG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 12 mm (DN 15 G 1/2 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 28574/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Surface: Chrome
• length: 500 mm

Technical data

Angle valve thermostat (09 414 06 99)

• Material: Cover cap Plastic; Housing Brass, conform to German drinking water regulations
• Thermal disinfection: possible, after releasing the temperature lock
• Flow at 3 bar: 13 l/min
• Max. operating temperature: 63 °C (70 °C for a short time for thermal disinfection)
• Max. Outlet temperature: 33 - 50 °C adjustable (38 °C ± 2 K )
• Surface: Chrome
• Connection: G 3/8 IG, G 3/8 AG
• Outlet: G 3/8 AG
• Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS
• Noise class: I, at 100% flow

Connecting set for angle valve thermostat (04 116 06 99)

• Surface: Chrome
• Connection: G 3/8 IG

Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS

Noise class: I, at 100% flow

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 10, DN 10 G 3/8 IG