High-load module MONTUS
Electronic wash basin tap XERIS E
Exposed wash basin tap VITUS VW-C-T
Exposed wash basin tap VITUS VW-E-T
HD-M small - high-pressure mixed water
Mixed water, ThermoProtect thermostat
Mixed water, ThermoProtect thermostat
Article number
High-load mounting module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted sanitary items, such as support (folding) handles, shower seats, shower/bath support handles, urinal partitions, accessories, etc. Self-supporting, powder-coated steel profiled frame with height-adjustable feet.
Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.
Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.
Infrared sensor-controlled. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Scope of delivery

  • High-load mounting module
    • Multiplex fastening plate, waterproof-bonded, 160 x 500 x 40 mm
    • Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
  • Fastening material for installation feet

Delivery data

  • Weight: 7,32 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,63 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Electronic self-closing exposed wash basin tap
    • ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
    • CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
    • SWS BE-F VITUS wireless bus extender
    • Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
    • 6 V solenoid valve with pre-filter
    • 2 backflow preventers (EN 1717: EB-type)
    • Pivoting outlet (lockable) with flow regulator
    • 6 V battery compartment (integrated)
  • 4x AA alkaline battery 1.5 V
  • 2 S-connections and rosettes (depth-adjustable)

Delivery data

  • Weight: 5,48 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor exposed wash basin tap
    • ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
    • Infrared sensor electronics, programmable
    • SWS BE-F VITUS wireless bus extender
    • Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
    • 6 V solenoid valve with pre-filter
    • 2 backflow preventers (EN 1717: EB-type)
    • Pivoting outlet (lockable) with flow regulator
    • 6 V battery compartment (integrated)
  • 2 S-connections and rosettes (depth-adjustable)

Delivery data

  • Weight: 5,45 kg/Piece
  • Packing unit: 1

Technical data

  • Material: Frame Steel
  • Surface: Frame Powder coat finish
  • Dimensions: w 24 cm x h 115 cm

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Actuation force (soft/medium/hard)
    • Manual programming (off/on)
    • Max. flow time (1-950 s)
    • Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
    • Actuation timeout (off/1-255 s, timeout 1-2000 min)
  • Setting options via manual programming
    • Max. flow time (4-120 s, 10 program stages)
    • Stagnation flush (off/20 s, every 24 h)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Projection to centre of aerator: 330 mm
  • Connection: 2x DN 15 G 1/2 AG
  • Certificates: Belgaqua

Technical data

  • Setting options via SWS SSC
    • Programming via short range reflex (off/on)
    • Max. flow time (1-600 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Max. flow time (4-240 s, 12 program stages)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Projection to centre of aerator: 330 mm
  • Connection: 2x DN 15 G 1/2 AG
  • Certificates: Belgaqua
Filter categories
Installation
Dry wall installation
-
-
-
System solutions
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
Connection
-
3/8"
1/2"
-
Function
-
Contact-free,
Self-closing electronic
Self-closing electronic
Contact-free,
Self-closing electronic
Temperature
-
Mixed water
Thermostat (incl. scald protection)
Thermostat (incl. scald protection),
Mixed water
Watersaving
-
Start/stop function
Start/stop function
-
Hygiene
-
Stagnation flush,
Therm. disinfection
Stagnation flush
Stagnation flush,
Therm. disinfection
Energy supply
-
via SWS or central power pack
Battery mode
Battery mode
Finish
-
Chrome
Chrome
Chrome
Pressure
-
High pressure / standard pressure
High pressure / standard pressure
High pressure / standard pressure
Noises
-
Noise class 1
-
-
Equipment
-
Backflow preventer,
Filter,
Flow restrictor
Backflow preventer
Backflow preventer,
Flow restrictor
Safety class
-
EB
-
-
4