To replace the thermostat cartridge.

Covered outlet connection and covered cone compression connection for connecting flexible connection hoses/copper pipes. With sanitary grease chamber head part. According to DIN 3227.

According to DIN 3842 for compact radiators. Angled form, lockable/adjustable.

Extension when installation of the concealed WBD-E-M masterbox is too deep.

Manual open/closed actuation. Shower connection at top.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For VITUS exposed shower fittings with shower connection at top.

without seal.

Mains operation. Universal vandal-resistant flush control with corrosion-safe siphon with LC sensor. For all ceramic and stainless steel bowls. Plug + play plug connector, IP 54.

For all XERIS wash basin taps.

With stainless steel braided sleeving.

With stainless steel braided sleeving.

With stainless steel braided sleeving.

Made from strong stainless steel with a high-quality, brushed finish. Manual actuation with automatic closing. Single-person assembly for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Manual open/closed actuation with clinic arm lever.

Delivery data

• Weight: 0,17 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Solid operating handle
• Polished brass body
• Grease chamber head part
• Push rod
• High-tensile brass cone compression connection with length compensation
• Solid metal rosette with slide ring

Delivery data

• Weight: 0,58 kg/Piece
• Packing unit: 1

Scope of delivery

• Radiator screw connection
• Union nut, annealed

Delivery data

• Weight: 0,15 kg/Piece
• Packing unit: 50

Delivery data

• Weight: 0,27 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/closed exposed shower tap
• Operating button open/close
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Open/closed ceramic cartridge
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,24 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Double nipple with rosette
• 2 compression connections
• Pipe elbow Ø 15 mm, can be cut to length

Delivery data

• Weight: 0,26 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 25

Scope of delivery

• E-module
• Solenoid valve with adapter
• Concealed transformer 100-240 VAC, 50-60 Hz
• Urinal siphon with LC sensor

Delivery data

• Weight: 0,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Flow regulator

Delivery data

• Weight: 0,004 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 50 (loosely packed)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Self-closing cartridge SC
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• Hand shower, 3-way adjustable and connection hose
• Slide bar
• Connection accessories with isolating valve(s), backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wall installation

Delivery data

• Weight: 9,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/closed exposed wash basin tap
• Ergonomic clinic arm lever 153 mm
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Open/closed ceramic cartridge
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with Care flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,18 kg/Piece
• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 757/IA, ACS
• Noise class: I
• Flow class: A

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Matt nickel
• Connection: DN 10 G 3/8 IG
• Outlet: DN 10 R 3/8 AG with ex worked thread

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 25 mm

Technical data

• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (top)
• Certificates: PA-IX 38240/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Dimensions: h 150 mm x d 100 mm
• Connection: G 1/2 IG
• Outlet: G 1/2 AG

Technical data

• Material: Brass
• Surface: Chrome
• Connection: Ø 8, DN 10 G 3/8 IG

Technical data

• Functions
• Stagnation flush (every 24 hours after last flush)
• Automatic stadium program (reduced flush volume with high usage frequency >2 users/5 min)
• Acoustic signal (when battery charge is low)
• Odour trap flush (when water level is low)
• Automatic flush stop (in case of blocked drain pipe)
• Setting options via Reedkontakt (accessories)
• Flush programs (1 l, 2 l, hybrid flush)
• Interval flush 5x (each flush 2 min contact time)
• Cleaning flush 10 s
• Cleaning stop 180 s
• Diagnostics program

Technical data

• Flow: max. 1,5 gpm ≈ 5,7 l/min
• Connection: M 24 x 1 AG

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG
• Certificates: DVGW

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Running time: 5 - 30 s
• Flow at 3 bar: 9 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 220 mm x h 1263 mm x d 70 mm
• length shower hose: 1500 mm
• length shower bar: 685 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Flow: 7.5 - 9.0 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38236/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O