Auxiliary connection double valve. With COMFORT handles and grease chamber head parts.

T-piece with union nut for quick installation.

Not suitable for drinking water. Actuation with cap.

With head part. Lockable. For protection against the unauthorised withdrawal of water.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

With COMFORT handle. Short version. According to DIN 3227.

Scope of delivery

• Auxiliary connection double valve
• 2 COMFORT handles
• 2 backflow preventers (EN 1717: EB-type)
• Internal thread G 1/2 IG
• 2 grease chamber head parts
• 2 hose screw connections
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,74 kg/Piece
• Packing unit: 1

Scope of delivery

• T-piece

Delivery data

• Weight: 0,21 kg/Piece
• Packing unit: 25

Scope of delivery

• Ball valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 50

Scope of delivery

• Lockable COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Grease chamber head part
• 2 keys (identical for all fittings)

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,64 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve (short version)
• COMFORT handle
• High-tensile brass cone compression connection with length compensation
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 5

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: 2 hose screw connections Ø 14.5 mm (DN 20 G 3/4 AG), Internal thread G 1/2 IG
• Safety device, conforms to EN 1717: EB
• Certificates: ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 AG (bottom), DN 20 G 1/2 IG (right)

Technical data

• Max. Operating pressure: 16 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Brass

Technical data

• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, NF, WRAS applied
• Noise class: I
• Flow class: A