Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For all XERIS wash basin taps.

With stainless steel braided sleeving.

With stainless steel braided sleeving.

Made from strong stainless steel with a high-quality, brushed finish. Manual actuation with automatic closing. Single-person assembly for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Flow regulator

Delivery data

• Weight: 0,004 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 50 (loosely packed)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Self-closing cartridge SC
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• Hand shower, 3-way adjustable and connection hose
• Slide bar
• Connection accessories with isolating valve(s), backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wall installation

Delivery data

• Weight: 9,20 kg/Piece
• Packing unit: 1

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 1,5 gpm ≈ 5,7 l/min
• Connection: M 24 x 1 AG

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG
• Certificates: DVGW

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Running time: 5 - 30 s
• Flow at 3 bar: 9 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 220 mm x h 1263 mm x d 70 mm
• length shower hose: 1500 mm
• length shower bar: 685 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua