Electronic wash basin tap XERIS E-T
HD-M mid - high-pressure mixed water, ThermoProtect thermostat
Article number
Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Scope of delivery

  • Infrared sensor single-hole tap
    • ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
    • Infrared sensor electronics, programmable
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,44 kg/Piece
  • Packing unit: 1

Technical data

  • Setting options via SWS SSC
    • Programming via short range reflex (off/on)
    • Sensor range (short/medium/long)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Thermal disinfection: possible, after releasing the temperature lock
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: PA-IX 29073/IO, Belgaqua
  • Noise class: I
  • Flow class: O
Filter categories
System solutions
SWS Water Management System,
Single Control SSC
Connection
3/8"
Function
Contact-free,
Self-closing electronic
Temperature
Thermostat (incl. scald protection),
Mixed water
Watersaving
Start/stop function
Hygiene
Stagnation flush,
Therm. disinfection
Energy supply
via SWS or central power pack
Finish
Chrome
Pressure
High pressure / standard pressure
Noises
Noise class 1
Equipment
Backflow preventer,
Filter,
Flow restrictor
Safety class
EB
1