WC operating panel MONTUS KONKAV
SWS Bus Extender wired BE-K Flow
Wall connection elbow PURIS
QUICK adapter
QUICK extension 20 mm
Extension set D-SC-T
Straight screw fitting with external thread
Union nut
Electronic wash basin tap CELIS E
QUICK plug-in technology
QUICK plug-in technology
HD-M - high-pressure mixed water
Article number
Dual flush. Actuation from top or from front.
Module for networking a solenoid valve for stagnation flush with the SWS server, wired. Transmits data between the solenoid valve and the SWS server.
Design version.
With socket for plug element at 30° pitch. Outer diameter suitable for accommodating the push rosette. Low stress corrosion cracking due to galvanised surface and stress-free plug connection.
As an extension adapter if QUICK adapter installed too deep with QUICK connector on both sides. With socket for plug element at 30° pitch.
Extension when installation of the concealed WBD-SC-T masterbox is too deep.
Outlet with high-tensile brass cone compression connection.
without seal.
Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Delivery data

  • Weight: 0,40 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Bus-Extender cable BE-K Flow

Delivery data

  • Weight: 0,16 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Wall connection elbow
    • Designer cover
    • Backflow preventer (EN 1717: EB-type)

Delivery data

  • Weight: 0,19 kg/Piece
  • Packing unit: 1

Scope of delivery

  • QUICK adapter
    • Protective cap with vent pin
    • Water stop
    • ASAG easy (Self-sealing connection thread)

Delivery data

  • Weight: 0,10 kg/Piece
  • Packing unit: 20

Delivery data

  • Weight: 0,05 kg/Piece
  • Packing unit: 1

Delivery data

  • Weight: 0,57 kg/Piece
  • Packing unit: 1

Delivery data

  • Weight: 0,05 kg/Piece
  • Packing unit: 20

Delivery data

  • Weight: 0,02 kg/Piece
  • Packing unit: 25

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • 6 V solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
  • Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,80 kg/Piece
  • Packing unit: 1

Technical data

  • Material: Plastic
  • Surface: Front panel Chrome
  • Dimensions front plate: w 230 mm x h 150 mm x d 9 mm

Technical data

  • Material: Housing Plastic; Parts in contact with water Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 15 G 1/2 AG with ASAG easy
  • Outlet: DN 15 G 1/2 AG
  • Safety device, conforms to EN 1717: EB

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • shaft length: 55 mm
  • Connection: DN 15 G 1/2 AG with ASAG easy
  • Outlet: QUICK plug-in technology DN 15

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • extension by: 20 mm
  • Connection: QUICK plug-in technology DN 15
  • Outlet: QUICK plug-in technology DN 15

Technical data

  • Material: Brass
  • Surface: Chrome
  • extension by: 50 mm

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 15 G 1/2 AG
  • Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

  • Material: Brass
  • Surface: Chrome
  • Connection: Ø 14, DN 15 G 1/2 IG

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: P-IX 19116/IZ, Belgaqua
  • Noise class: I
  • Flow class: Z
Filter categories
Function
Self-closing mechanical
-
-
-
-
-
-
-
Contact-free,
Self-closing electronic
Temperature
Cold water/pre-m. water
-
-
-
-
-
-
-
Mixed water
Watersaving
Dual flush
-
-
-
-
-
-
-
-
Finish
Chrome
-
-
-
-
-
-
-
Chrome
Installation
Wet Wall installation,
Dry wall installation
-
-
-
-
-
-
-
-
System solutions
-
SWS Water Management System
-
-
-
-
-
-
SWS Water Management System,
Single Control SSC
Energy supply
-
via SWS or central power pack,
Mains operation
-
-
-
-
-
-
Mains mode
Connection
-
-
1/2",
ASAG/ASAG easy
1/2",
ASAG/ASAG easy,
Plug-in technology
Plug-in technology
-
1/2"
-
-
Outlet
-
-
1/2"
-
-
-
3/8",
Compression connection
-
3/8"
Equipment
-
-
Backflow preventer
-
-
-
-
-
Filter,
Backflow preventer
Hygiene
-
-
-
-
-
-
-
-
Stagnation flush
Pressure
-
-
-
-
-
-
-
-
High pressure / standard pressure
Noises
-
-
-
-
-
-
-
-
Noise class 1
Safety class
-
-
-
-
-
-
-
-
EB
Certificates
-
-
-
-
-
-
-
-
WELL
9