With stainless steel braided sleeving and a rotatable connection line.

For angle valves with push rod.

For angle valves with push rod.

Manual actuation with automatic closing. Easy flow time adjustment.

Brass cone compression connection.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 50 (loosely packed)

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,008 kg/Piece
• Packing unit: 10

Delivery data

• Weight: 0,008 kg/Piece
• Packing unit: 10

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II with hot water restrictor
• Recessed aerator (theft-protected)
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 410 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,66 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,97 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG with pre-assembled seal
• Certificates: DVGW

Technical data

• Material: Die-cast zinc
• Surface: Matt chrome
• spanner size 4-sided: 6 mm

Technical data

• Material: Brass
• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Brass
• Surface: Chrome
• Connection: DN 10 G 3/8 AG

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19436/IO, DIN-DVGW, Belgaqua, WRAS
• Noise class: I
• Flow class: O

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 8, DN 10 G 3/8 IG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19116/IZ, Belgaqua, WRAS applied
• Noise class: I
• Flow class: Z