With stainless steel braided sleeving and a rotatable connection line.

Not suitable for drinking water. Actuation with cap.

Low-pressure flush valve. All-metal design with brass push button. Conform to DIN EN 12541. Single flush.

With stainless steel braided sleeving.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Brass cone compression connection.

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Scope of delivery

• Ball valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 50

Scope of delivery

• T-screw connection
• 3 compression connections

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Exposed WC flush valve
• Self-closing cartridge with automatic nozzle cleaning needle
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 1,05 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 50 (loosely packed)

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,96 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,72 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 25

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 3/8 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Max. Operating pressure: 16 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Matt chrome

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Flow pressure: 0.4 - 4.0 bar
• Single flush: 8.0 - 14.0 l
• Flush flow: 1.0 - 1.4 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 25 G 1 AG
• Flush pipe connection: Ø 30 mm

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 19116/IZ, WRAS applied
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 12, DN 10 G 3/8 IG