With stainless steel braided sleeving and a rotatable connection line.

Dual flush. Actuation from top or from front.

With COMFORT handle. PT 1000 temperature sensor. Used with the SWS water management system. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender. According to DIN 3227.

Central computer unit for setting up a water management system and control for water-saving drinking water hygiene. Access via PC, mobile device via web app or building management system. <br> • Networking of up to 64 participants (e.g. fittings) via cable or radio (meshwork). <br> • Participants can be individually parameterised centrally. <br> • Centrally controlled stagnation flush (simultaneous). <br> - At fixed intervals and on fixed dates. <br> - When a temperature is exceeded/fallen below. - Triggered by an external signal (BMS, switch, etc.).

Not suitable for drinking water.

For WBD-E-M concealed masterbox. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For protection against unauthorised actuation. According to DIN 3227.

For protection against unauthorised actuation. According to DIN 3227.

Outlet with high-tensile brass cone compression connection.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed WC flush valve. Automatic triggering when leaving the WC (room monitoring). Dual flush. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Power supply via SWS, mains adapter or battery compartment.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. With extended outlet 140 mm.

With lever head part.

Made from strong stainless steel with a high-quality, brushed finish. Manual actuation with automatic closing. Single-person assembly for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above. Solenoid valve for thermal disinfection with SWS integrated.

Brass cone compression connection.

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,38 kg/Piece
• Packing unit: 1

Scope of delivery

• COMFORT PT angle valve
• COMFORT handle
• PT1000 wired temperature sensor
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• 4 plastic clips for fastening the sensor cable

Delivery data

• Weight: 0,20 kg/Piece
• Packing unit: 1

Scope of delivery

• SWS server
• Integrated micro SD card

Delivery data

• Weight: 1,26 kg/Piece
• Packing unit: 1

Scope of delivery

• Plug valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• Mixed water operating button with push sleeve
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Installation frame
• Fastening material

Delivery data

• Weight: 1,57 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,006 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• Safe actuation
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 10

Scope of delivery

• Angle valve (long version)

Delivery data

• Weight: 0,20 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 25

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame with infrared sensor electronics, programmable

Delivery data

• Weight: 1,11 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,52 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,55 kg/Piece
• Packing unit: 20

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Self-closing cartridge SC
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• Hand shower, 3-way adjustable and connection hose
• Slide bar
• Connection accessories with isolating valve(s), backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wall installation

Delivery data

• Weight: 9,20 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,81 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,03 kg/Piece
• Packing unit: 20

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, Union nut G 3/8 IG with pre-assembled seal

Technical data

• Material: Plastic
• Surface: Front panel Chrome
• Dimensions front plate: w 230 mm x h 150 mm x d 6.5 mm

Technical data

• Cable: 2x 0.14 mm², 1,000 mm long
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: ACS

Technical data

• Programmable parameters (SWS server)
• User rights management
• Duration of flow
• Energy saving mode
• Trap flushing
• Max. flow time
• Post Runtime
• Cleaning stop
• Sensor range
• Flush time
• Stadium program
• Stagnation flush
• Thermal disinfection
• Pre-flush
• Approved according to: DIN EN 61000-6-2:2005, DIN EN 61000-6-3:2006 + A1:2010, DIN EN 61000-6-3:2007 + A1:2011, DIN EN 61000-4-2:2009, EN 300328, EN 301 489-1, EN 301 489-17, DIN EN 60950-1:2006 / A12:2011

Technical data

• Max. Operating pressure: 12.5 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Connection: DN 10 G 3/8 AG

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Material: Actuation Brass; Front panel Brass
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 180 mm x h 188 mm x d 11.5 mm
• Protection class: IP65 (CVD touch electronics)

Technical data

• Material: Die-cast zinc
• Surface: Matt chrome
• spanner size 4-sided: 5 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, SVGW, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, SVGW
• Noise class: I
• Flow class: A

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 IG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 8 mm (DN 10 G 3/8 AG)
• Outlet: Ø 8 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/every 24 hours after last flush)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Material: Front panel Stainless steel
• Surface: Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua
• Noise class: I

Technical data

• Flow at 1 bar: 85 l/min
• Flow at 3 bar: 89 l/min
• Flow pressure: 1.2 - 5.0 bar
• Max. Resting pressure: 10 bar
• Material: Brass, conform to German drinking water regulations; Actuation Die-cast zinc
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm

Technical data

• Running time: 5 - 30 s
• Flow at 3 bar: 9 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 220 mm x h 1263 mm x d 70 mm
• length shower hose: 1500 mm
• length shower bar: 685 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 12, DN 15 G 1/2 IG