Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

With stainless steel braided sleeving.

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Delivery data

• Packing unit: 1

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 20

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 10 mm (DN 10 G 3/8 AG)
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua
• Noise class: I

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 3/8 IG with pre-assembled seal