Mains operation. Vandal-resistant flush control with corrosion-safe siphon with LC sensor. For installation behind sanitary ceramics. Suitable for retrofitting existing systems with the following urinal ceramics: KERAMAG - Aller, Public Line, Renova VILLEROY & BOCH - Magnum, Subway, Arriba.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• E-module
• Waterpath with 6 V solenoid valve
• Concealed transformer 100-240 VAC, 50-60 Hz
• Isolating valve
• Special supply set with flush pipe connector
• Flexible hose
• Fastening material
• Urinal siphon with LC sensor

Delivery data

• Weight: 1,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• ThermoProtect thermostat, conform to EN 1111, temperature lock (factory setting 38 °C), anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,45 kg/Piece
• Packing unit: 1

Technical data

• Functions
• Stagnation flush (every 24 hours after last flush)
• Automatic stadium program (reduced flush volume with high usage frequency >2 users/5 min)
• Acoustic signal (when battery charge is low)
• Odour trap flush (when water level is low)
• Automatic flush stop (in case of blocked drain pipe)
• Setting options via Reedkontakt (accessories)
• Flush programs (1 l, 2 l, hybrid flush)
• Interval flush 5x (each flush 2 min contact time)
• Cleaning flush 10 s
• Cleaning stop 180 s
• Diagnostics program
• Material: Waterpath Plastic

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Thermal disinfection: possible, after releasing the temperature lock
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29073/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O