Outlet with high-tensile brass cone compression connection.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks.

For all XERIS E wash basin taps. 2 LEED points when used in the public sector. 6 LEED points when used in the private sector.

Made from a strong extruded aluminium profile with a high-quality, brushed (production from 07/2020) or blasted (production until 06/2020) and anodised finish.

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• Pre-filter with flow restrictor
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Set
• Packing unit: 1

Scope of delivery

• Connection cover
• Fastening material

Delivery data

• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x G 3/8 IG
• Certificates: P-IX 9524-I
• Noise class: I

Technical data

• Flow: max. 0,35 gpm ≈ 1,3 l/min
• Connection: M 24 x 1 AG

Technical data

• Measurement length: 451 - 950 mm
• Material: Aluminium
• Surface: Blasted anodised (production to 06/2020)