With COMFORT handle and grease chamber head part.

Dual flush. Actuation from top or from front.

For angle valves.

Complete tap for subsequent installation. Frost-safe valve seat 200 mm from front edge of facade. Automatic ventilation of the inside pipe with each closing operation.

With shut-off and regulating function.

For drawing off drinking water samples (DIN ISO 19458). Actuation of angle valve under cover cap.

For integrating the SWS water management system with a central building control/automation system. Translates the SWS protocol into the BACnet IP/MSTP bus protocol. Data points can be chosen as required – subsequent upgrade possible to max. 2,500 data points without replacing hardware. Configuration accessible only via individual password.

Extension when installation of the concealed WBD-SC-T masterbox is too deep.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For building sealing of SCHELL masterboxes according to DIN 18534.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

With stainless steel braided sleeving.

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• ASAG easy (Self-sealing connection thread)
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,47 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,38 kg/Piece
• Packing unit: 1

Scope of delivery

• Backflow preventer
• Union nut G 3/8 IG
• High-tensile brass cone compression connection with length compensation

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for outside wall
• Fastening material

Delivery data

• Weight: 1,56 kg/Piece
• Packing unit: 8

Scope of delivery

• Concealed spindle valve
• COMFORT handle
• Non-rising head part
• Push rod
• Maintenance-free spindle seal
• Protective cap
• Push rosette Ø 65 mm

Delivery data

• Weight: 0,46 kg/Piece
• Packing unit: 20

Scope of delivery

• Sampling angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• Cranked sampling pipe with union nut
• Cap with chain

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 20

Scope of delivery

• Gateway with web interface
• ARM9 processor
• LED status indicators
• Rugged metal housing for top hat rail installation
• RS-485/COM1 interfaces
• RJ45 LAN interface, 10/100 Mbps
• Preinstalled German and English language packs

Delivery data

• Weight: 0,38 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,57 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,37 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 20

Scope of delivery

• Expansion sleeve
• Adhesive tape

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Hand shower, 3-way adjustable and connection hose
• Slide bar
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,26 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: PA-IX 026/IIA, DIN-DVGW applied, ACS, Belgaqua
• Noise class: II, at 100% flow
• Flow class: A

Technical data

• Material: Plastic
• Surface: Front panel Chrome
• Dimensions front plate: w 230 mm x h 150 mm x d 6.5 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut DN 10 G 3/8 IG
• Outlet: Ø 10 mm (DN 10 G 1/2 AG)
• Safety device, conforms to EN 1717: EB

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 85 °C
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Installation depth: 0 - 40 mm
• Connection: DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 IG
• Certificates: P-IX 28893/II
• Noise class: II

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), G 3/4 AG
• Certificates: DVGW, ACS

Technical data

• Data points: 200
• Dimensions: w 31 mm x h 100 mm x d 70 mm
• Input: 12 - 24 VAC

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 50 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 12 mm (DN 15 G 1/2 AG)
• Outlet: Ø 12 mm (DN 15 G 1/2 AG)

Technical data

• Dimensions: w 267 mm x h 280 mm
• Certificates: KIWA

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• length shower hose: 1500 mm
• length shower bar: 678 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Surface: Connection Chrome
• length: 500 mm
• Connection: Union nut G 1/2 IG with pre-assembled seal, Pipe stub Ø 10 mm