For a retrofit connection of an appliance to a pre-installed angle valve. With COMFORT handle and grease chamber head part. HD safety combination (EN 1717).

With COMFORT handle and grease chamber head part.

Angle valve with integrated appliance valve for connecting household appliances. Actuation of angle valve under cover cap.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Connection from rear or, with optional mounting frame, from top, bottom or sides.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. With extended outlet 140 mm.

Manual actuation with automatic closing. Easy flow time adjustment.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

For compensating for the level of pressure in the cold/hot water supply before sampling fittings. Prevents water admixing for fittings with a mixing shaft (e.g. together with small geysers*). Improves adjustment range for single-lever taps. Prevents variations in temperature with pressure fluctuations.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. With extended outlet 140 mm.

Brass cone compression connection.

Brass cone compression connection.

Scope of delivery

• Appliance valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• Hose screw connection
• High-tensile brass cone compression connection with length compensation

Delivery data

• Weight: 0,51 kg/Piece
• Packing unit: 1

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,34 kg/Piece
• Packing unit: 5

Scope of delivery

• Double-spindle angle valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• ASAG easy (Self-sealing connection thread)
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,37 kg/Piece
• Packing unit: 20

Scope of delivery

• Hand shower
• Connection hose, plastic, G 1/2 IG x 1200 mm
• Wall bracket
• Fastening material

Delivery data

• Weight: 0,42 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Waterpath with 6 V solenoid valve
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,85 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,81 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,52 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II
• Recessed aerator (theft-protected)
• Flexible Clean-Fix S connection hose, G 3/8 IG x 410 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,44 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Pressure balance valve (PBV)
• 2 backflow preventers (EN 1717: EB-type)

Delivery data

• Weight: 0,21 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Mixed water operating button with push sleeve
• Installation frame with infrared sensor electronics, programmable
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,70 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,66 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 25

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 25

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 IG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: DVGW, ACS, Belgaqua

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG with ASAG easy
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 2850/IA, ACS
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), DN 10 G 3/8 AG
• Certificates: ACS

Technical data

• Material: Plastic
• Surface: Chrome
• Connection: G 1/2 IG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Plastic; Waterpath Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 190 mm
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua
• Noise class: I

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 19436/IO, DIN-DVGW, WRAS
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Flow: 2.5 - 9.0 l/min
• Flow pressure: 0.8 - 5.0 bar
• Max. Operating pressure: 10 bar
• Max. operating temperature: 70 °C (90 °C for thermal disinfection)
• Material: Housing Plastic; Parts in contact with water Conforms to German drinking water regulations
• Surface: White
• Connection: 2x G 3/8 AG
• Outlet: 2x G 3/8 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Brass
• Surface: Outlet Chrome; Actuation Chrome; Front panel Chrome
• Outlet: L 110 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua
• Noise class: I

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 12, DN 10 G 3/8 IG

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 15, DN 20 G 3/4 IG