Auxiliary connection valve for wall batteries. With COMFORT handle and grease chamber head part. HD safety combination (EN 1717).

Dual flush. Actuation from top or from front.

Solenoid valve can be retrofitted to the planned connection in a water path. Function: Hot water is routed to bypass the thermostatic valve. Selection is made by using the on-site connection (central building control system, key switch, etc.).

Complete tap for subsequent installation. Frost-safe valve seat 200 mm from front edge of facade. Automatic ventilation of the inside pipe with each closing operation.

For drawing off drinking water samples (DIN ISO 19458). Actuation of angle valve under cover cap.

According to DIN 3227.

Infrared sensor-controlled. Mains operation.

Manual actuation with automatic closing. Easy flow time adjustment.

Scope of delivery

• Auxiliary connection valve, right-hand version
• COMFORT handle
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• Union nut G 3/4 IG
• Grease chamber head part
• Hose screw connection
• Spacer

Delivery data

• Weight: 0,77 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,009 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,38 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 12 V monostable with connecting nipple and pre-filter
• Adapter cable

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for outside wall
• Fastening material

Delivery data

• Weight: 1,56 kg/Piece
• Packing unit: 8

Scope of delivery

• Sampling angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm
• Cranked sampling pipe with union nut
• Cap with chain

Delivery data

• Weight: 0,44 kg/Piece
• Packing unit: 20

Scope of delivery

• Inclined-seat valve
• COMFORT handle
• High-tensile brass cone compression connection
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 5

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• Flexible connection hose, G 3/8 IG x 450 mm, with pre-filter
• Transformer plug 6 VDC, 100-240 VAC, 50-60 Hz
• Fastening material for wash basin installation

Delivery data

• Weight: 1,57 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 25

Scope of delivery

• Self-closing exposed wash basin tap
• SC self-closing button
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Self-closing cartridge SC II
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,91 kg/Piece
• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 20 G 3/4 AG (right)
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), DN 20 G 3/4 IG
• Safety device, conforms to EN 1717: HD
• Certificates: DVGW, ACS, Belgaqua

Technical data

• Flow: max. 8,0 l/min

Technical data

• Material: Plastic
• Surface: Front panel Chrome
• Dimensions front plate: w 230 mm x h 150 mm x d 6.5 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Max. operating temperature: 120 °C temporarily
• Material: Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), G 3/4 AG
• Certificates: DVGW, ACS

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 018/IA, ACS, KIWA, NF
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Cleaning stop (off/120 s)
• Energy saving mode: Automatic energy saving mode
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 8 mm (DN 10 G 3/8 AG)
• Outlet: Ø 8 mm (DN 10 G 3/8 AG)

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38234/IO, Belgaqua
• Noise class: I
• Flow class: O