With stainless steel braided sleeving.

With stainless steel braided sleeving.

With stainless steel braided sleeving.

With COMFORT handle and grease chamber head part.

With stainless steel braided sleeving and a rotatable connection line.

With stainless steel braided sleeving and a rotatable connection line.

Dual flush. Actuation from top or from front. Vandal-resistant, zinc die-cast version.

With head part. Lockable. For protection against the unauthorised withdrawal of water.

Urinal module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars. Prepared for the connection of exposed urinal flush valves.

Complete tap for subsequent installation. Frost-safe valve seat 200 mm from front edge of facade. Automatic ventilation of the inside pipe with each closing operation.

Compact single-lever mixer tap with design lever.

For WBD-SC-M concealed masterbox. Manual actuation with automatic closing.

For use with the SWS water management system. Connection cable between SWS BE-F wireless bus extender and infrared sensor electronics.

For reducing the pressure level of the cold water supply for Modus EH-T to 1 bar. Supports the function of the thermostat-safe MODUS EH-T cartridge in case of highly varying pressure conditions.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Shower connection at top. Integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Manual actuation with automatic closing. Easy flow time adjustment. Shower connection at bottom.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed WC flush valve. Automatic triggering when leaving the WC (room monitoring). Dual flush. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Power supply via SWS, mains adapter or battery compartment.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For SCHELL COMPACT II concealed WC flush valve.

For single tap points.

For angle valves with push rod.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks.

without seal.

Conform to DIN 3267.

2-pin power supply extension cable with plug and socket. Suitable for SCHELL MODUS E wash basin taps.

One end with Ø 18 mm flange for G 1/2 union nut, other end smooth.

One end with Ø 14 mm flange for G 3/8 union nut, other end with Ø 18 mm flange for G 1/2 union nut.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

Extension 40 mm, non-rising spindle.

For all SCHELL wash basin taps PURIS, VENUS, CELIS, MODUS and PETIT. Not suitable for low pressure taps.

With stainless steel braided sleeving.

Made from a strong extruded aluminium profile with a high-quality, anodised finish. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

For SCHELL COMPACT II concealed WC flush valve. Dual flush.

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 20

Scope of delivery

• Appliance inclined-seat seat valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Water stop
• Grease chamber head part
• Hose screw connection
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,42 kg/Piece
• Packing unit: 40

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 1,14 kg/Piece
• Packing unit: 1

Scope of delivery

• Lockable COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Grease chamber head part
• 2 keys

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Urinal module
• Cross bar for urinal attachment 40-375 mm, height-adjustable
• Cross bar with noise-insulated fitting connection, with construction plug, height-adjustable
• Cross bar with drain elbow and construction plug, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for installation feet
• Fastening material for urinal installation (fastening bolts M 8 x 100 mm, protection hose, plastic collar bushings, nuts, flat washers, cover caps)

Delivery data

• Weight: 9,74 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for outside wall
• Anti-twist wall rosette with internal thread for inside wall
• Fastening material

Delivery data

• Weight: 1,56 kg/Piece
• Packing unit: 8

Scope of delivery

• Single-lever single-hole tap
• Single-lever mixer
• Single-lever mixer ceramic cartridge with adjustable hot water and flow limitation
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 440 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• SC-M self-closing button with push sleeve
• Installation frame
• Fastening material

Delivery data

• Weight: 1,24 kg/Piece
• Packing unit: 1

Scope of delivery

• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Adapter cable, approx. 250 mm, with 3-pin plug connector

Delivery data

• Weight: 0,14 kg/Piece
• Packing unit: 1

Scope of delivery

• Pressure limiter 1 bar
• Reducing nipple 1/2 IG x 3/8 AG
• Adapter 1/2 AG x 3/8 IG

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower tap
• SC-M self-closing button
• Self-closing cartridge SC II with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 3,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame with infrared sensor electronics, programmable

Delivery data

• Weight: 1,11 kg/Piece
• Packing unit: 1

Scope of delivery

• Rubber ring
• Brass flat washer

Delivery data

• Weight: 0,002 kg/Piece
• Packing unit: 50

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,36 kg/Piece
• Packing unit: 1

Scope of delivery

• T-piece
• High-tensile brass cone compression connection

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer operating panel
• Operating button
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame

Delivery data

• Weight: 0,60 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 5

Delivery data

• Weight: 0,008 kg/Piece
• Packing unit: 10

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,42 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 25

Scope of delivery

• WC internal connector
• WC flush pipe Ø 28 x 1 mm
• WC flush pipe clip

Delivery data

• Weight: 0,55 kg/Piece
• Packing unit: 1

Scope of delivery

• COMFORT handle
• Snap-on bush

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 10

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 20

Scope of delivery

Angle valve thermostat (09 414 06 99)

• Angle valve thermostat
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters

Connecting set for angle valve thermostat (04 116 06 99)

• T-piece with movable union nut G 3/8 IG
• Flexible Clean-Flex S hose with union nuts.

Delivery data

• Weight: 0,83 kg/Set
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Aerator with chrome sleeve
• Seal

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 13,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer operating panel
• Operating buttons for economy/main flush
• Self-closing cartridge with automatic nozzle cleaning needle
• Baffle plate for flow rate regulation
• Installation frame

Delivery data

• Weight: 0,83 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, External thread G 1/2 AG

Technical data

• Surface: Connection Chrome
• length: 1000 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, External thread G 1/2 AG

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, External thread G 1/2 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: ACS

Technical data

• Surface: Connection Chrome
• length: 200 mm
• nominal diameter: DN 8
• Connection: Elbow with union nut G 3/8 IG and pre-assembled seal, Union nut G 3/8 IG with pre-assembled seal

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: Union nut G 3/8 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Material: Front panel Die-cast zinc
• Surface: Front panel Chrome
• Dimensions front plate: w 240 mm x h 162 mm x d 15 mm

Technical data

• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 50 mm
• Water connection: DN 15 G 1/2 AG (bottom)
• Waste water outlet: Ø 50 mm
• Water outlet: DN 15 G 1/2 IG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Actuation Die-cast zinc; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29002/IO, DIN-DVGW, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Actuation Brass; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 180 mm x h 188 mm x d 11.5 mm

Technical data

• Max. Operating pressure: 10 bar
• Max. Resting pressure: 1 bar
• Max. operating temperature: 70 °C
• Surface: Chrome
• Connection: G 3/8 IG
• Outlet: G 3/8 AG

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (top)
• Certificates: PA-IX 28574/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Running time: 5 - 30 s
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38241/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/every 24 hours after last flush)
• Dual flush (eco flush volume 3 l with dwell time <45 s, main flush volume 4.5/6/9 l)
• Material: Front panel Stainless steel
• Surface: Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm

Technical data

• Connection: Ø 15, for union nut DN 20 G 3/4 IG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua, WRAS applied
• Noise class: I

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 IG, Ø 10 mm (DN 15 G 1/2 AG)

Technical data

• Single flush: 4.5 - 9.0 l
• Material: Plastic
• Surface: Chrome; Front panel Chrome
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 IG

Technical data

• Material: Brass
• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x G 3/8 IG
• Certificates: P-IX 9524-I
• Noise class: I

Technical data

• Material: Brass
• Surface: Chrome
• Connection: Ø 8, DN 10 G 3/8 IG

Technical data

• Material: Flush pipe Brass
• Surface: Chrome

Technical data

• Surface: Chrome

Technical data

• Surface: Chrome
• length: 1000 mm

Technical data

• Surface: Chrome
• length: 600 mm

Technical data

Angle valve thermostat (09 414 06 99)

• Material: Cover cap Plastic; Housing Brass, conform to German drinking water regulations
• Thermal disinfection: possible, after releasing the temperature lock
• Flow at 3 bar: 13 l/min
• Max. operating temperature: 63 °C (70 °C for a short time for thermal disinfection)
• Max. Outlet temperature: 33 - 50 °C adjustable (38 °C ± 2 K )
• Surface: Chrome
• Connection: G 3/8 IG, G 3/8 AG
• Outlet: G 3/8 AG
• Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS
• Noise class: I, at 100% flow

Connecting set for angle valve thermostat (04 116 06 99)

• Surface: Chrome
• Connection: G 3/8 IG

Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS

Noise class: I, at 100% flow

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Flow: max. 5 l/min pressure independent
• Surface: Chrome
• Connection: M 24 x 1 AG

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG
• Certificates: DVGW

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Shower head Brass, conform to German drinking water regulations; Housing Aluminium; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Shower head Chrome; Housing Brush anodised aluminium
• Dimensions: w 226 mm x h 1200 mm x d 115 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Dual flush: Economy flush volume 3 l, Main 4.5 - 9.0 l
• Material: Actuation Die-cast zinc; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 120 mm x h 150 mm x d 12 mm