With stainless steel braided sleeving.

With stainless steel braided sleeving and a rotatable connection line.

For WBD-SC-T concealed masterbox. Manual actuation with automatic closing.

For WBD-SC-M concealed masterbox. Manual actuation with automatic closing.

Manual open/closed actuation. Shower connection at bottom.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

Manual actuation with automatic closing. Easy flow time adjustment.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed urinal flush valve. Intended for networking with the SCHELL SWS water management system. Power supply via SWS or mains adapter (together with BE-F wireless bus extender).

With stainless steel braided sleeving.

With stainless steel braided sleeving.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC-V self-closing button with push sleeve
• Installation frame
• Fastening material

Delivery data

• Weight: 1,96 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• SC-M self-closing button with push sleeve
• Installation frame
• Fastening material

Delivery data

• Weight: 1,24 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever exposed shower tap
• Single-lever mixer
• Single-lever mixing ceramic cartridge with hot water and flow restrictor
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 3,99 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,56 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II with hot water restrictor
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Installation frame with infrared sensor electronics, programmable

Delivery data

• Weight: 0,62 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,87 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Material: Actuation Brass; Front panel Brass
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 173 mm x h 281 mm x d 11.5 mm

Technical data

• Material: Actuation Brass; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 180 mm x h 188 mm x d 11.5 mm

Technical data

• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38242/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x G 3/8 IG
• Certificates: P-IX 9524-I
• Noise class: I

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19958/IO, DIN-DVGW, Belgaqua, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Flush time (1-15 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Pre-flush (off/1 s, lockout time 5-60 min after last flush)
• Automatic stadium program (off/1 s per user, main flush 20-60s after last use)
• Trap flushing (off/1-240 h after last flush)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Pre-flush (off/1 s)
• Automatic stadium program (off/1 s per user)
• Rap flush (off/on)
• Flush time (1-15 s)
• Material: Front panel Plastic
• Surface: Front panel Chrome
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Union nut G 3/8 IG

Technical data

• Surface: Connection Chrome
• length: 300 mm
• Connection: Union nut G 1/2 IG with pre-assembled seal, Pipe stub Ø 10 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O