With stainless steel braided sleeving.

With stainless steel braided sleeving.

Valve for sampling according to DIN ISO 19458.

Inclined filter for protecting connected household appliances.

With COMFORT handle. To protect high-quality fittings, e.g. electronically controlled fittings. According to DIN 3227.

WC module with concealed cistern 12 cm without frame. For expansion, installation and conversion work in masonry. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

Kit for conduit installation during preliminary building work. Frost-safe valve seat in masonry for wall thicknesses of 200-500 mm.

Not suitable for drinking water. Actuation with cap.

For connection to angle valves.

Bistable 6 V solenoid valve for thermal disinfection with SCHELL SWS water management system. Solenoid valve can be retrofitted to the planned connection in the water path. Function: Hot water is routed to bypass the thermostatic valve. Selectable via SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Battery operation.

Infrared sensor-controlled. Additional single-lever operation. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

3-pin cable, only for use as a power supply extension cable. Suitable for electronic taps in the series GRANDIS, PURIS, VENUS, XELIS and XERIS.

For all XERIS E wash basin taps. 2 LEED points when used in the public sector. 6 LEED points when used in the private sector.

For FIELD E and FIELD H WC operating panel. In combination with a MONTUS WC module with 12 cm concealed cistern.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

Manual actuation with automatic closing. Easy flow time adjustment.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from a strong extruded aluminium profile with a high-quality, brushed (production from 07/2020) or blasted (production until 06/2020) and anodised finish.

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 20

Scope of delivery

• Sampling valve
• 90° sampling pipe with union nut and seals

Delivery data

• Weight: 0,42 kg/Piece
• Packing unit: 1

Scope of delivery

• Inclined-seat valve
• Clear cap
• Filter (mesh gauge: 315 µm)
• Union nut G 3/4 IG

Delivery data

• Weight: 0,37 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• COMFORT handle
• Filter (mesh gauge: 250 µm)
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,20 kg/Piece
• Packing unit: 60

Scope of delivery

• Concealed WC cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Plaster base mat

Delivery data

• Weight: 3,76 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for inside wall
• Anti-twist wall rosette with internal thread for outside wall
• Fastening material

Delivery data

• Weight: 1,92 kg/Piece
• Packing unit: 8

Scope of delivery

• Ball valve
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 50

Scope of delivery

• T-piece
• 2 high-tensile brass cone compression connections with length compensation
• 1 movable union nut G 3/8 IG

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 5

Scope of delivery

• TD solenoid valve, 6 V bistable with connecting nipple and pre-filter
• Connection cable

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• T-screw connection
• 3 compression connections

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller with hot water restrictor
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Fastening material for wash basin installation

Delivery data

• Weight: 1,86 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz

Delivery data

• Weight: 3,73 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,07 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Set
• Packing unit: 1

Scope of delivery

• Lifting motor with mounting bracket

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II with hot water restrictor
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,35 kg/Piece
• Packing unit: 1

Scope of delivery

• Connection cover
• Fastening material

Delivery data

• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 300 mm
• nominal diameter: DN 8
• Connection: Union nut G 1/2 IG with pre-assembled seal, Union nut G 3/8 IG with pre-assembled seal

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: 2x union nut G 1/2 IG with pre-assembled seal

Technical data

• Material: Union nut Brass; Sampling pipe Stainless steel; Housing Brass, conform to German drinking water regulations
• Max. operating temperature: 120 °C temporarily

Technical data

• Material: Filter insert Stainless steel/PA; Housing Brass, conform to German drinking water regulations
• Connection: DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: DN 10 G 3/8 AG
• Certificates: P-IX 198/IA, ACS
• Noise class: I
• Flow class: A

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Dimensions: w 48.8 cm x h 42.5 cm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (top)
• Certificates: Belgaqua, NF

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Max. Operating pressure: 16 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Brass

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut G 3/8 IG
• Outlet: 2x Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 3x Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• length: 3 m

Technical data

• Flow: max. 0,35 gpm ≈ 1,3 l/min
• Connection: M 24 x 1 AG

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19958/IO, DIN-DVGW, Belgaqua, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Measurement length: 150 - 450 mm
• Material: Aluminium
• Surface: Brushed anodised (production from 07/2020)