Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,37 kg/Piece
• Packing unit: 1

Scope of delivery

Angle valve thermostat (09 414 06 99)

• Angle valve thermostat
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters

Connecting set for angle valve thermostat (04 116 06 99)

• T-piece with movable union nut G 3/8 IG
• Flexible Clean-Flex S hose with union nuts.

Delivery data

• Weight: 0,83 kg/Set
• Packing unit: 1

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

Angle valve thermostat (09 414 06 99)

• Material: Cover cap Plastic; Housing Brass, conform to German drinking water regulations
• Thermal disinfection: possible, after releasing the temperature lock
• Flow at 3 bar: 13 l/min
• Max. operating temperature: 63 °C (70 °C for a short time for thermal disinfection)
• Max. Outlet temperature: 33 - 50 °C adjustable (38 °C ± 2 K )
• Surface: Chrome
• Connection: G 3/8 IG, G 3/8 AG
• Outlet: G 3/8 AG
• Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS
• Noise class: I, at 100% flow

Connecting set for angle valve thermostat (04 116 06 99)

• Surface: Chrome
• Connection: G 3/8 IG

Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS

Noise class: I, at 100% flow