With stainless steel braided sleeving and a rotatable connection line.

WC module, height 115 cm with concealed cistern 12 cm. For barrier-free WCs. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

Infrared sensor-controlled. Additional single-lever operation. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. Stagnation flushing in the mixing ratio of the touch-free actuation, independent of the single-lever position.

According to DIN 3227.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. With extended outlet 140 mm.

All-metal design with brass push button. Conform to DIN EN 12541. Single flush.

All-metal design with brass push button. Conform to DIN EN 12541.

Aerator key for SCHELL aerators for XERIS and PURIS SC from 05/2024.

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 20

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable special feet 0-15 cm, self-supporting
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PVC drain elbow Ø 90 / 100 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet
• MONTUS wall bracket set (150-210 mm)

Delivery data

• Weight: 17,44 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor kitchen tap
• Single-lever mixer
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Ceramic cartridge with hot water restrictor
• Pivoting outlet with configurable pivot range
• Flow regulator
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter

Delivery data

• Weight: 3,63 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Push rod
• Push rosette Ø 60 mm

Delivery data

• Weight: 0,18 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,49 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed WC flush valve
• Self-closing cartridge with automatic nozzle cleaning needle
• Push rosette Ø 60 mm
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 1,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed urinal flush valve
• Self-closing cartridge with nozzle bore pre-filter
• Urinal internal connector
• Push rosette Ø 60 mm
• Flush pipe Ø 18 mm x 193 mm

Delivery data

• Weight: 0,70 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,005 kg/Piece
• Packing unit: 1

Technical data

• Surface: Connection Chrome
• length: 500 mm
• nominal diameter: DN 8
• Connection: High-tensile brass cone compression connection Ø 10 mm (DN 10 G 3/8 AG), Pipe stub Ø 10 mm

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 42 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Tap hole diameter: 35 - 37 mm
• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/after last flush/fixed interval)
• Flow: max. 10 l/min (manual activation)
• Flow: max. 8.5 l/min (electronic activation)
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29861/IO, WRAS
• Noise class: I
• Flow class: O

Technical data

• Material: Brass, conform to German drinking water regulations; Actuation Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG
• Certificates: P-IX 212/IA, ACS, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Single flush: 4.5 - 9.0 l
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm
• Certificates: PA-IX 9901/II, DIN-DVGW, Belgaqua
• Noise class: II, at 100% flow

Technical data

• Flow pressure: 0.8 - 5.0 bar
• Max. Resting pressure: 8 bar
• Flush flow: max. 0.3 l/s
• Flush volume adjustable: 1.0 - 6.0 l
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Internal connector Ø 43 mm (flush pipe Ø 18 mm)
• Certificates: PA-IX 9892/II, DIN-DVGW
• Noise class: II, at 100% flow

Technical data

• Material: Plastic