For activating thermal disinfection or a cleaning stop. Keys snaps into place and lockable in 2 positions.

Covered outlet connection and covered cone compression connection for connecting flexible connection hoses/copper pipes. With sanitary grease chamber head part. According to DIN 3227.

According to DIN 3842 for compact radiators. Straight form, lockable/adjustable.

Design version.

For WBD-E-T concealed masterbox. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For exposed installation with connection from above, below or sides. Prepared breakout fields for pipe penetration.

For wash basins with tap hole that is too large.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Manual actuation with automatic closing. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above. Solenoid valve for thermal disinfection with SWS integrated.

Manual actuation with automatic closing. Easy flow time adjustment.

Manual actuation with automatic closing. Easy flow time adjustment.

Extension 40 mm, non-rising spindle.

For all SCHELL wash basin taps PURIS E, PURIS SC until 05/2024, VENUS, CELIS, MODUS and PETIT. Not suitable for low pressure taps. 2 LEED points when used in the public sector. 6 LEED points when used in the private sector.

Wash basin mounting module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars.

For all SCHELL wash basin taps PURIS E, PURIS SC until 05/2024, VENUS, CELIS, MODUS and PETIT. Not suitable for low pressure taps.

According to DIN 3842 for compact radiators. Straight form.

Scope of delivery

• Exposed key switch 240 V/3 A
• 2 keys

Delivery data

• Weight: 0,19 kg/Piece
• Packing unit: 1

Scope of delivery

• Designer angle valve
• Solid operating handle
• Polished brass body
• Grease chamber head part
• Push rod
• High-tensile brass cone compression connection with length compensation
• Solid metal rosette with slide ring

Delivery data

• Weight: 0,58 kg/Piece
• Packing unit: 1

Scope of delivery

• Radiator screw connection
• Union nut, annealed

Delivery data

• Weight: 0,33 kg/Piece
• Packing unit: 5

Scope of delivery

• Wall connection elbow
• Designer cover
• Backflow preventer (EN 1717: EB-type)

Delivery data

• Weight: 0,19 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Installation frame
• Fastening material

Delivery data

• Weight: 1,92 kg/Piece
• Packing unit: 1

Scope of delivery

• Installation frame
• Rubber cable bushing for exposed cable Ø 15 mm
• Fastening material

Delivery data

• Weight: 0,33 kg/Piece
• Packing unit: 1

Scope of delivery

• O-ring seal
• Rosette Ø 55 mm

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,81 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,31 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Self-closing cartridge SC II
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II
• Flow regulator
• Fastening material for wash basin installation

Delivery data

• Weight: 1,00 kg/Piece
• Packing unit: 10

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II with hot water restrictor
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,12 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• 10 flow regulators with chrome sleeve
• 10 gaskets

Delivery data

• Weight: 0,02 kg/Set
• Packing unit: 1

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Cross bar with noise-insulated angle valve connections 80/160/320 mm, siphon elbow, siphon rubber and construction plug, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 10,74 kg/Piece
• Packing unit: 1

Scope of delivery

• Flow regulator with chrome sleeve
• Seal
• Flow regulator key

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Radiator screw connection
• Union nut, annealed

Delivery data

• Weight: 0,45 kg/Piece
• Packing unit: 10

Technical data

• Protection class: IP65

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 757/IA, ACS
• Noise class: I
• Flow class: A

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Surface: Matt nickel
• Connection: DN 20 G 3/4 IG
• Outlet: DN 20 R 3/4 AG with ex worked thread

Technical data

• Material: Housing Plastic; Parts in contact with water Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: DN 15 G 1/2 AG
• Safety device, conforms to EN 1717: EB

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Material: Actuation Brass; Front panel Brass
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 173 mm x h 281 mm x d 11.5 mm
• Protection class: IP65 (CVD touch electronics)

Technical data

• Material: Plastic
• Surface: Chrome

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Running time: 5 - 30 s (20 s )
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 19958/IO, DIN-DVGW, WRAS
• Noise class: I
• Flow class: O

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19958/IO, DIN-DVGW, Belgaqua, WRAS
• Noise class: I
• Flow class: O

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Flow: max. 0,35 gpm ≈ 1,3 l/min
• Surface: Chrome
• Connection: M 24 x 1 AG

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 50 mm
• Water connection: 2x DN 15 G 1/2 AG (bottom)
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)
• Water outlet: 2x DN 15 G 1/2 IG

Technical data

• Flow: max. 1,5 gpm ≈ 5,7 l/min
• Surface: Chrome
• Connection: M 24 x 1 AG

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass
• Connection: DN 32 G 1 1/4 IG
• Outlet: DN 32 R 1 1/4 AG with ex worked thread