WC operating panel MONTUS CIRCUM
WC operating panel MONTUS FIELD
Flow restrictor for angle valves DN 10
Frost-resistant outdoor tap POLAR II set
Electronic wash basin tap MODUS Trend E
SWS Inlet temperature sensor LINUS
Self-closing wash basin tap PETIT SC
Exposed wash basin tap VITUS VW-SC-M
Stabilising ring
Aerator key for recessed aerators M24
Concealed wash basin tap LINUS W-E-M
Compression screw connection - fully assembled
HD-M - high-pressure mixed water
HD-K - high-pressure cold water/pre-mixed water
Mixed water
Mixed water
Article number
Dual flush. Actuation from top or from front.
Dual flush. Actuation from top or from front. Vandal-resistant, zinc die-cast version.
Pressure-independent flow restrictor.
Kit for conduit installation during preliminary building work. Frost-safe valve seat in masonry for wall thicknesses of 200-500 mm.
Infrared sensor-controlled. Battery operation.
PT1000 temperature sensor for use with SWS water management system to measure temperature of cold and/or hot water connection in LINUS fittings. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender.
Manual actuation with automatic closing. Easy flow time adjustment.
Manual actuation with automatic closing. Easy flow time adjustment.
For mounting washbasin taps on stainless steel basins.
Aerator key for SCHELL aerators for XERIS and PURIS SC from 05/2024.
For WBW-E-M concealed masterbox. Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.
Brass cone compression connection.

Delivery data

  • Weight: 0,38 kg/Piece
  • Packing unit: 1

Delivery data

  • Weight: 1,14 kg/Piece
  • Packing unit: 1

Delivery data

  • Weight: 0,03 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Frost-resistant outdoor tap
    • Conduit with integrated valve seat
    • Fitting housing with lockable head part and COMFORT operating handle
    • Backflow preventer
    • Anti-vacuum device
    • Long valve shaft
  • Hose screw connection
  • Protective pipe
  • Installation plug
  • Cut-to-length gauges
  • Anti-twist wall rosette with internal thread for inside wall
  • Anti-twist wall rosette with internal thread for outside wall
  • Fastening material

Delivery data

  • Weight: 1,92 kg/Piece
  • Packing unit: 8

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • 6 V solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 200 mm, with 2-pin plug, protection class IP65
    • 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
  • 6 V battery compartment, protection class IP65
  • 4x AA alkaline battery 1.5 V
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,78 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Temperature sensor PT 1000 with cable, connecting plug and O-ring seal

Delivery data

  • Weight: 0,03 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Self-closing single-hole tap
    • Self-closing cartridge SC II
    • Flow regulator
  • Fastening material for wash basin installation

Delivery data

  • Weight: 0,98 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Self-closing exposed wash basin tap
    • SC-M self-closing button
    • Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
    • Self-closing cartridge SC II with hot water restrictor
    • 2 backflow preventers (EN 1717: EB-type)
    • Pivoting outlet (lockable) with flow regulator
  • 2 S-connections and rosettes (depth-adjustable)

Delivery data

  • Weight: 4,82 kg/Piece
  • Packing unit: 1

Delivery data

  • Packing unit: 1

Delivery data

  • Weight: 0,005 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Front panel with infrared sensor window
    • Mixed water operating button with push sleeve
  • Installation frame with infrared sensor electronics, programmable
  • Wall outlet with flow regulator (theft-safe)
  • Fastening material

Delivery data

  • Weight: 1,70 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Union nut
  • Locking ring (brass cone, rubber seal, base ring)

Delivery data

  • Weight: 0,04 kg/Piece
  • Packing unit: 20

Technical data

  • Material: Plastic
  • Surface: Front panel Chrome
  • Dimensions front plate: w 230 mm x h 150 mm x d 6.5 mm

Technical data

  • Material: Front panel Die-cast zinc
  • Surface: Front panel Chrome
  • Dimensions front plate: w 240 mm x h 162 mm x d 15 mm

Technical data

  • Flow: max. 4 l/min pressure independent
  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 10 G 3/8 IG
  • Outlet: DN 10 G 3/8 AG

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Matt chrome
  • hole diameter: 38 mm
  • Connection: DN 15 G 1/2 AG
  • Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
  • Safety device, conforms to EN 1717: HD
  • Certificates: P-IX 19319/II, DVGW, Belgaqua
  • Noise class: II

Technical data

  • Setting options via short range reflex
    • Sensor range area (approx. 2-17 cm)
    • Cleaning stop (off/120 s)
  • Flow: max. 1 gpm ≈ 3,8 l/min
  • Flow pressure: 0.5 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: P-IX 29853/IO, WRAS applied
  • Noise class: I
  • Flow class: O

Technical data

  • Cable: 2x 0.14 mm², 500 mm long
  • Material: Plug Brass, conform to German drinking water regulations; Sensor Stainless steel 1.4404
  • Connection: M 16 x 1 AG

Technical data

  • Running time: 2 - 15 s (7 s )
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 15 G 1/2 AG
  • Certificates: P-IX 19958/IO, dr, Watermark, WELS
  • Noise class: I
  • Flow class: O

Technical data

  • Running time: 2 - 15 s (7 s )
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Projection to centre of aerator: 270 mm
  • Connection: 2x DN 15 G 1/2 AG
  • Certificates: PA-IX 38237/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Material: Plastic

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Brass
  • Surface: Outlet Chrome; Actuation Chrome; Front panel Chrome
  • Outlet: L 110 mm
  • Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

  • Material: Union nut Brass
  • Surface: Chrome
  • Connection: Ø 10, DN 15 G 1/2 IG
Filter categories
Function
Self-closing mechanical
Self-closing mechanical
-
-
Contact-free,
Self-closing electronic
-
Self-closing mechanical
Self-closing mechanical
-
-
Contact-free,
Self-closing electronic
-
Temperature
Cold water/pre-m. water
Cold water/pre-m. water
-
-
Mixed water
-
Cold water/pre-m. water
Mixed water
-
-
Mixed water
-
Watersaving
Dual flush
Dual flush
-
-
-
-
-
-
-
-
-
-
Finish
Chrome
Chrome
-
-
Chrome
-
Chrome
Chrome
-
-
Chrome
-
Installation
Wet Wall installation,
Dry wall installation
Wet Wall installation,
Dry wall installation
-
-
-
-
-
-
-
-
-
-
Connection
-
-
3/8"
1/2"
3/8"
-
1/2"
-
-
-
-
-
Outlet
-
-
3/8"
Hose screw connection
-
-
-
-
-
-
-
-
Equipment
-
-
Flow restrictor
Backflow preventer,
Anti-vacuum device
Filter,
Backflow preventer
-
-
-
-
-
-
-
Certificates
-
-
WELL
DVGW,
Belgaqua
-
-
-
-
-
-
-
-
Noises
-
-
-
Noise class 2
Noise class 1
-
Noise class 1
-
-
-
-
-
Safety class
-
-
-
HD
EB
-
-
-
-
-
-
-
Hygiene
-
-
-
-
Stagnation flush
-
-
Therm. disinfection
-
-
Stagnation flush,
Therm. disinfection
-
Energy supply
-
-
-
-
Battery mode
-
-
-
-
-
via SWS or central power pack
-
Pressure
-
-
-
-
High pressure / standard pressure
-
High pressure / standard pressure
-
-
-
High pressure / standard pressure
-
System solutions
-
-
-
-
-
SWS Water Management System
-
-
-
-
SWS Water Management System,
Single Control SSC
-
12