Manual open/cold/hot actuation with clinic arm lever.

Wash basin mounting module, height 124 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars. Prepared for connection to SCHELL concealed masterboxes (wash basin).

Solenoid valve can be retrofitted to the planned connection in a water path. Function: Hot water is routed to bypass the thermostatic valve. Selection is made by using the on-site connection (central building control system, key switch, etc.).

With COMFORT handle and grease chamber head part.

WC module, height 82 cm with concealed cistern 15 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

WC module, height 115 cm with concealed cistern 8 cm. For flat stud partition/exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

WC module, height 115 cm with concealed cistern 12 cm. For barrier-free WCs. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Connection from rear or, with optional mounting frame, from top, bottom or sides.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks. With extended outlet 140 mm.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

With head part. Lockable. For protection against the unauthorised withdrawal of water.

Manual actuation with automatic closing. Easy flow time adjustment.

Infrared sensor-controlled. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

Extension 40 mm, non-rising spindle.

All-metal design with brass push button. Conform to DIN EN 12541.

For all SCHELL wash basin taps PURIS, VENUS, CELIS, MODUS and PETIT. Not suitable for low pressure taps.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Conform to DIN EN 12541.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Prepared for manual thermal disinfection. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Brass cone compression connection.

Scope of delivery

• Open/cold/hot exposed wash basin tap
• Ergonomic clinic arm lever 153 mm
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• Open /cold/warm ceramic cartridge with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with Care flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,05 kg/Piece
• Packing unit: 1

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Cross bar with drain elbow and construction plug, height-adjustable
• Cross bar for masterbox, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,00 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 12 V monostable with connecting nipple and pre-filter
• Adapter cable

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Sink valve
• COMFORT handle
• Backflow preventer
• Hose screw connection
• High-tensile brass cone compression connection
• Seals
• Screw-type rosette

Delivery data

• Weight: 0,56 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 15 cm, actuation from top or front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable installation feet 0-20 cm
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,60 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 8 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable installation feet 0-15 cm
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 13,52 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable special feet 0-15 cm, self-supporting
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PVC drain elbow Ø 90 / 100 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet
• MONTUS wall bracket set (150-210 mm)

Delivery data

• Weight: 17,44 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Waterpath with 6 V solenoid valve
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,60 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• High-tensile brass cone compression connection

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 25

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 20

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,82 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Lockable COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Grease chamber head part
• 2 keys (identical for all fittings)

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing wall outlet tap
• SC self-closing button
• Self-closing cartridge SC II
• Flow regulator
• Rosette Ø 60 mm

Delivery data

• Weight: 0,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• Infrared sensor electronics, programmable
• SWS BE-F VITUS wireless bus extender
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,32 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed urinal flush valve
• Self-closing cartridge with nozzle bore pre-filter
• Isolating valve
• Urinal internal connector
• Push rosette Ø 60 mm
• Flush pipe Ø 18 mm x 193 mm

Delivery data

• Weight: 0,71 kg/Piece
• Packing unit: 1

Scope of delivery

• Aerator with chrome sleeve
• Seal

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,35 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed WC flush valve
• Operating handle made from brass
• Self-closing cartridge with automatic nozzle cleaning needle
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 0,62 kg/Piece
• Packing unit: 20

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,68 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Connection pipe
• Drain pipe
• Fastening material for WC installation (plastic collar bushings, nuts, flat washers, cover caps)

Delivery data

• Weight: 0,36 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,97 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,93 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 12,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Union nut
• Locking ring (brass cone, rubber seal, base ring)

Delivery data

• Weight: 0,03 kg/Piece
• Packing unit: 20

Technical data

• Flow: 7.5 - 9.0 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38239/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 124 cm
• Waste water connection: Ø 50 mm
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• shaft diameter: 28 mm
• Adjustment range: 1 - 50 mm
• Connection: Ø 10 mm (DN 15 G 1/2 AG)
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: ACS, WRAS

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 40 cm x h 82 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear, top, sides)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 6/7 l adjustable (6 l factory setting)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (top)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 42 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Plastic; Waterpath Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 250 mm
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 IG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 12 mm (DN 15 G 1/2 AG)
• Outlet: Ø 12 mm (DN 15 G 1/2 AG)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 10 mm (DN 10 G 3/8 AG)
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow: 1.0 - 5.0 l/min
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 19116/IZ
• Noise class: I
• Flow class: Z

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Running time: 6 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 0.8 - 5.0 bar
• Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 28340/IO, DIN-DVGW, dr, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Max. flow time (1-600 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Max. flow time (4-240 s, 12 program stages)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38235/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Flow pressure: 0.8 - 5.0 bar
• Max. Resting pressure: 8 bar
• Flush flow: max. 0.3 l/s
• Flush volume adjustable: 1.0 - 6.0 l
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Internal connector Ø 43 mm (flush pipe Ø 18 mm)
• Certificates: PA-IX 9892/II, DIN-DVGW
• Noise class: II, at 100% flow

Technical data

• Flow: max. 5 l/min pressure independent
• Surface: Chrome
• Connection: M 24 x 1 AG

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Single flush: 6 l
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm
• Certificates: PA-IX 18853/II, DIN-DVGW, Belgaqua
• Noise class: II, at 100% flow

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I, Belgaqua, WRAS applied
• Noise class: I

Technical data

• Connection pipe: Ø 45 mm x 230 mm
• Drain pipe: Ø 110 mm x 160 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 19116/IZ, Belgaqua, WRAS applied
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Material: Union nut Brass
• Surface: Chrome
• Connection: Ø 14, DN 15 G 1/2 IG