Exposed wash basin tap VITUS VW-AH-M
Angle valve with regulating function COMFORT with filter
Concealed WC cistern MONTUS
Frost-resistant outdoor tap POLAR II set
SWS Bus extender cable BE-K
T-piece
Electronic wash basin tap XERIS E
Electronic wash basin tap PURIS E
Self-closing wash basin tap PETIT SC
Shower head COMFORT Flex
Stabilising ring
Electronic wash basin tap XERIS E
Electronic wash basin tap XERIS E
Mixed water
Type C 120 n
HD-K large - high-pressure cold water/pre-mixed water
HD-K - high-pressure cold water/pre-mixed water
HD-K - high-pressure cold water/pre-mixed water
HD-K large - high-pressure cold water/pre-mixed water
HD-M small - high-pressure mixed water
Article number
Manual open/cold/hot actuation with clinic arm lever.
With COMFORT handle. To protect high-quality fittings, e.g. electronically controlled fittings. According to DIN 3227.
WC module with concealed cistern 12 cm without frame. For expansion, installation and conversion work in masonry. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).
Kit for conduit installation during preliminary building work. Frost-safe valve seat in masonry for wall thicknesses of 200-500 mm.
Module for linking an SWS subscriber to the SWS Server via a cabled network. Transfers data between SWS subscriber and SWS Server.
For connection to angle valves.
Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.
Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit. With extended outlet 140 mm.
Manual actuation with automatic closing. Easy flow time adjustment.
Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.
For mounting washbasin taps on stainless steel basins.
Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.
Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

  • Open/cold/hot exposed wash basin tap
    • Ergonomic clinic arm lever 153 mm
    • Open /cold/warm ceramic cartridge with hot water restrictor
    • 2 backflow preventers (EN 1717: EB-type)
    • Pivoting outlet (lockable) with Care flow regulator
  • 2 S-connections and rosettes (depth-adjustable)

Delivery data

  • Weight: 4,88 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Angle valve
    • COMFORT handle
    • Filter (mesh gauge: 250 µm)
    • ASAG easy (Self-sealing connection thread)
    • Long push rod
  • High-tensile brass cone compression connection with length compensation
  • Push rosette Ø 54 mm

Delivery data

  • Weight: 0,20 kg/Piece
  • Packing unit: 60

Scope of delivery

  • Concealed WC cistern 12 cm, actuation from front
    • Angle valve with regulating function, G 1/2 AG, noise class I
    • Flush pipe Ø 45 mm, with construction plug
  • Plaster base mat

Delivery data

  • Weight: 3,76 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Frost-resistant outdoor tap
    • Conduit with integrated valve seat
    • Fitting housing with lockable head part and COMFORT operating handle
    • Backflow preventer
    • Anti-vacuum device
    • Long valve shaft
  • Hose screw connection
  • Protective pipe
  • Installation plug
  • Cut-to-length gauges
  • Anti-twist wall rosette with internal thread for inside wall
  • Anti-twist wall rosette with internal thread for outside wall
  • Fastening material

Delivery data

  • Weight: 1,92 kg/Piece
  • Packing unit: 8

Scope of delivery

  • Bus extender cable BE-K

Delivery data

  • Weight: 0,16 kg/Piece
  • Packing unit: 1

Scope of delivery

  • T-piece
  • 2 high-tensile brass cone compression connections with length compensation
  • 1 movable union nut G 3/8 IG

Delivery data

  • Weight: 0,11 kg/Piece
  • Packing unit: 5

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • Standpipe extension
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,33 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • 6 V solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,43 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Self-closing single-hole tap
    • Self-closing cartridge SC II
    • Flow regulator
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,00 kg/Piece
  • Packing unit: 10

Scope of delivery

  • Shower head

Delivery data

  • Weight: 0,50 kg/Piece
  • Packing unit: 1

Delivery data

  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • Standpipe extension
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
  • Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,47 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
  • Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,72 kg/Piece
  • Packing unit: 1

Technical data

  • Flow: 7.5 - 9.0 l/min
  • Flow pressure: 1.0 - 5.0 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Projection to centre of aerator: 210 mm
  • Connection: 2x DN 15 G 1/2 AG
  • Certificates: PA-IX 38239/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 15 G 1/2 AG with ASAG easy
  • Outlet: DN 10 G 3/8 AG
  • Certificates: P-IX 198/IA, ACS
  • Noise class: I
  • Flow class: A

Technical data

  • Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
  • Dimensions: w 48.8 cm x h 42.5 cm
  • Flush pipe connection: Ø 45 mm
  • Water connection: DN 15 R 1/2 AG (top)
  • Certificates: Belgaqua, NF

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Matt chrome
  • hole diameter: 38 mm
  • Connection: DN 15 G 1/2 AG
  • Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
  • Safety device, conforms to EN 1717: HD
  • Certificates: P-IX 19319/II, DVGW, Belgaqua
  • Noise class: II

Technical data

  • Material: Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: Union nut G 3/8 IG
  • Outlet: 2x Ø 10 mm (DN 10 G 3/8 AG)

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Connection: G 3/8 IG
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: G 3/8 IG
  • Certificates: P-IX 9523-I
  • Noise class: I

Technical data

  • Running time: 2 - 15 s (7 s )
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: DN 15 G 1/2 AG
  • Certificates: P-IX 19958/IO, DIN-DVGW, WRAS
  • Noise class: I
  • Flow class: O

Technical data

  • Flow: max. 9 l/min pressure independent
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Tilt angle: 12 - 32 °
  • Connection: DN 15 G 1/2 AG
  • Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
  • Noise class: I
  • Flow class: Z

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O
Filter categories
Function
Single lever,
Open/closed
-
-
-
-
-
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Self-closing mechanical
-
-
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Temperature
Mixed water
-
-
-
-
-
Cold water/pre-m. water
Cold water/pre-m. water
Cold water/pre-m. water
-
-
Cold water/pre-m. water
Mixed water
Finish
Chrome
Chrome
-
-
-
-
Chrome
Chrome
Chrome
Chrome
-
Chrome
Chrome
Connection
-
1/2",
ASAG/ASAG easy
1/2"
1/2"
-
-
3/8"
3/8"
1/2"
1/2"
-
3/8"
3/8"
Outlet
-
3/8",
Compression connection
-
Hose screw connection
-
-
-
-
-
-
-
-
-
Noises
-
Noise class 1
-
Noise class 2
-
-
Noise class 1
Noise class 1
Noise class 1
-
-
Noise class 1
Noise class 1
Equipment
-
Filter
-
Backflow preventer,
Anti-vacuum device
-
-
Backflow preventer,
Filter,
Flow restrictor
Filter
-
-
-
Backflow preventer,
Filter,
Flow restrictor
Backflow preventer,
Filter,
Flow restrictor
Watersaving
-
-
Dual flush
-
-
-
Start/stop function
-
-
-
-
-
Start/stop function
Installation
-
-
Wet Wall installation
-
-
-
-
-
-
-
-
-
-
Safety class
-
-
-
HD
-
-
EB
-
-
-
-
EB
EB
Certificates
-
-
-
DVGW,
Belgaqua
-
-
-
-
DVGW,
WRAS
-
-
-
-
System solutions
-
-
-
-
SWS Water Management System
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
-
-
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
Energy supply
-
-
-
-
via SWS or central power pack,
Mains operation
-
via SWS or central power pack
via SWS or central power pack
-
-
-
Mains mode
Mains mode
Hygiene
-
-
-
-
-
-
Stagnation flush
Stagnation flush,
Therm. disinfection
-
-
-
Stagnation flush
Stagnation flush,
Therm. disinfection
Pressure
-
-
-
-
-
-
High pressure / standard pressure
High pressure / standard pressure
High pressure / standard pressure
-
-
High pressure / standard pressure
High pressure / standard pressure
13