For attaching MONTUS modules for exposed installation. Tool-less depth adjustment with 3 mm thread grid.

For standards-compliant pipework flushing (EN 806). Connector on Inlet side plug connector without locking and output-side rotatable drain elbow for G 3/4 AG hose connection.

WC module, height 82 cm with concealed cistern 15 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

WC module, height 115 cm with concealed cistern 8 cm. For flat stud partition/exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

WC module, height 115 cm with concealed cistern 12 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

For LINUS W-E-V concealed wash basin taps. Electronic actuation. With sealed housing bushings and internal isolating valve.

With shut-off and regulating function.

For WBD-E-T concealed masterbox. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

According to DIN 3227.

PT1000 temperature sensor for use with SWS water management system to measure outlet temperature in LINUS fittings. Connection to SWS BE-K wired bus extender or SWS BE-F wireless bus extender.

Infrared sensor-controlled. Mains operation.

For angle valves with push rod.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. With extended outlet 140 mm.

Manual actuation with automatic closing. Easy flow time adjustment.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

Manual actuation with automatic closing. Easy flow time adjustment.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

For mounting washbasin taps on stainless steel basins.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• 2 wall brackets
• 2 thread detent pins for depth adjustment
• Fastening material

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 15 cm, actuation from top or front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable installation feet 0-20 cm
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,60 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 8 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable installation feet 0-15 cm
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 13,52 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• PP drain elbow Ø 90/90 mm, with construction plug
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 12,72 kg/Piece
• Packing unit: 1

Scope of delivery

• Masterbox
• Roughing-in housing
• Concealed wash basin tap with isolating valve
• 6 V solenoid valve
• Pre-filter
• Backflow preventer (EN 1717: EB-type)
• Mount for wall outlet
• Flushing nozzle
• Flush-mounted cap

Delivery data

• Weight: 1,98 kg/Piece
• Packing unit: 1

Scope of delivery

• Concealed spindle valve
• COMFORT handle
• Non-rising head part
• Push rod
• Maintenance-free spindle seal
• Protective cap
• Push rosette Ø 65 mm

Delivery data

• Weight: 0,35 kg/Piece
• Packing unit: 20

Delivery data

• Weight: 0,01 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Fastening material

Delivery data

• Weight: 1,84 kg/Piece
• Packing unit: 1

Scope of delivery

• Inclined-seat valve
• COMFORT handle
• High-tensile brass cone compression connection
• Rosette Ø 54 mm (depth 3 mm)

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 5

Scope of delivery

• Temperature sensor PT 1000 with cable, connecting plug and O-ring seal

Delivery data

• Weight: 0,06 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller with hot water restrictor
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• Transformer plug 6 VDC, 100-240 VAC, 50-60 Hz
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,008 kg/Piece
• Packing unit: 10

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,49 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing single-hole tap
• Self-closing cartridge SC II
• Flow regulator
• Fastening material for wash basin installation

Delivery data

• Weight: 1,00 kg/Piece
• Packing unit: 10

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing wall outlet tap
• SC self-closing button
• Self-closing cartridge SC II
• Isolating valve
• Flow regulator
• Rosette Ø 60 mm

Delivery data

• Weight: 0,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,48 kg/Piece
• Packing unit: 1

Delivery data

• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,61 kg/Piece
• Packing unit: 1

Technical data

• Material: Plastic
• depth setting range: 150 - 210 mm

Technical data

• Material: Brass, conform to German drinking water regulations, Plastic
• Surface: Brass
• Connection: QUICK plug-in technology DN 15
• Outlet: G 3/4 AG

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 40 cm x h 82 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear, top, sides)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 6/7 l adjustable (6 l factory setting)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (top)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear centre)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Flow at 3 bar: 15 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Plastic; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Dimensions: w 149 mm x h 138 mm x d 140 mm
• Installation depth: 100 - 124 mm
• Connection: G 1/2 IG
• Certificates: Belgaqua

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 85 °C
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Installation depth: 0 - 40 mm
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 G 1/2 IG
• Certificates: P-IX 28893/II
• Noise class: II

Technical data

• Material: Die-cast zinc
• Surface: Matt chrome
• spanner size 4-sided: 6 mm

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Material: Actuation Brass; Front panel Stainless steel
• Surface: Actuation Chrome; Front panel Brushed stainless steel
• Dimensions front plate: w 183 mm x h 283 mm x d 3 mm
• Protection class: IP65 (CVD touch electronics)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: PA-IX 018/IA, ACS, NF
• Noise class: I, at 100% flow
• Flow class: A

Technical data

• Cable: 2x 0.14 mm², 500 mm long
• Material: Plug Stainless steel 1.4404; Sensor Stainless steel 1.4404
• Connection: G 1/2 AG

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Material: Brass
• Surface: Chrome
• Connection: DN 10 G 3/8 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I

Technical data

• Running time: 2 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 19958/IO, DIN-DVGW, WRAS
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Running time: 6 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 0.8 - 5.0 bar
• Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 28340/IO, DIN-DVGW, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 330 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Stainless steel
• Surface: Outlet Chrome; Front panel Brushed stainless steel
• Outlet: L 110 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm