Wash basin mounting module, height 124 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars. Prepared for connection to SCHELL concealed masterboxes (wash basin).

Solenoid valve can be retrofitted to the planned connection in a water path. Function: Hot water is routed to bypass the thermostatic valve. Selection is made by using the on-site connection (central building control system, key switch, etc.).

WC module, height 82 cm with concealed cistern 15 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush).

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Connection from rear or, with optional mounting frame, from top, bottom or sides.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. For open hot water storage tanks. With extended outlet 140 mm.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

With head part. Lockable. For protection against the unauthorised withdrawal of water.

Manual actuation with automatic closing. Easy flow time adjustment.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Cross bar with drain elbow and construction plug, height-adjustable
• Cross bar for masterbox, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,00 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 12 V monostable with connecting nipple and pre-filter
• Adapter cable

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 15 cm, actuation from top or front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Height-adjustable installation feet 0-20 cm
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• PP drain elbow Ø 90/90 mm, with construction plug
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 11,60 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Waterpath with 6 V solenoid valve
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• 6 V battery compartment (integrated)
• 4x AAA alkaline battery 1.5 V
• 3 flexible Clean-Fix S connection hoses, G 3/8 IG x 380/500 mm
• Fastening material for wash basin installation

Delivery data

• Weight: 2,60 kg/Piece
• Packing unit: 1

Scope of delivery

• Elbow screw connection
• 2 high-tensile brass cone compression connections

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 20

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Lockable COMFORT handle
• Backflow preventer (EN 1717: EB-type)
• Grease chamber head part
• 2 keys (identical for all fittings)

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing wall outlet tap
• SC self-closing button
• Self-closing cartridge SC II
• Flow regulator
• Rosette Ø 60 mm

Delivery data

• Weight: 0,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,35 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,93 kg/Piece
• Packing unit: 1

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 124 cm
• Waste water connection: Ø 50 mm
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 40 cm x h 82 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear, top, sides)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Plastic; Waterpath Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 250 mm
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Ø 12 mm (DN 15 G 1/2 AG)
• Outlet: Ø 12 mm (DN 15 G 1/2 AG)

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Running time: 6 - 15 s (7 s )
• Flow: max. 5 l/min pressure independent
• Flow pressure: 0.8 - 5.0 bar
• Material: Housing Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 28340/IO, DIN-DVGW, dr, WRAS
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 28575/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O