Wash basin outlet valve QUAD PUSH OPEN
Self-closing wash basin taps XERIS SC
Electronic wash basin tap XERIS E
Electronic wash basin tap PURIS E
HD-M mid - high-pressure mixed water
HD-K large - high-pressure cold water/pre-mixed water
HD-M - high-pressure mixed water
Article number
Lockable outlet valve with pressure closure for wash basins with overflow drain.
Manual actuation with automatic closing. Easy flow time adjustment.
Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.
Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. With extended outlet 140 mm.

Scope of delivery

  • Drain set
  • Seals

Delivery data

  • Weight: 0,52 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Self-closing single-hole tap
    • Self-closing cartridge SC II with hot water restrictor
    • Flow regulator
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,05 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • Standpipe extension
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
  • 6 V battery compartment, protection class IP65
  • 4x AA alkaline battery 1.5 V
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,57 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • 6 V solenoid valve with pre-filter
    • Flow regulator
  • Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 380 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,66 kg/Piece
  • Packing unit: 1

Technical data

  • Material: Brass
  • Surface: Chrome
  • Outlet: G 1 1/4 AG
  • Outflow capacity: 20 l/min

Technical data

  • Running time: 2 - 15 s (7 s )
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: PA-IX 29071/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Programming via short range reflex (off/on)
    • Sensor range (short/medium/long)
    • Max. flow time (1-360 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass, conform to German drinking water regulations
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: P-IX 9523-I, Belgaqua
  • Noise class: I
Filter categories
Connection
-
3/8"
3/8"
3/8"
Function
-
Self-closing mechanical
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Temperature
-
Mixed water
Cold water/pre-m. water
Mixed water
Finish
-
Chrome
Chrome
Chrome
Pressure
-
High pressure / standard pressure
High pressure / standard pressure
High pressure / standard pressure
Noises
-
Noise class 1
Noise class 1
Noise class 1
Equipment
-
Filter,
Backflow preventer
Backflow preventer,
Filter,
Flow restrictor
Backflow preventer,
Filter
Safety class
-
EB
EB
EB
System solutions
-
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
Watersaving
-
-
Start/stop function
-
Hygiene
-
-
Stagnation flush
Stagnation flush
Energy supply
-
-
Battery mode
Mains mode
4