Expansion sleeve
Connection cover shower panel LINUS inox
Electronic wash basin tap XERIS E
Electronic wash basin tap XERIS E
HD-K mid. - high-pressure cold water/pre-mixed water
HD-M large - high-pressure mixed water
Article number
For building sealing of SCHELL masterboxes according to DIN 18534.
Connection cover for covering cold/hot water supply laid as exposed supply lines.
Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.
Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

  • Expansion sleeve
  • Adhesive tape

Delivery data

  • Weight: 0,12 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Connection cover
  • Fastening material

Delivery data

  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Infrared sensor electronics, programmable
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
  • 6 V battery compartment, protection class IP65
  • 4x AA alkaline battery 1.5 V
  • Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 1,80 kg/Piece
  • Packing unit: 1

Scope of delivery

  • Infrared sensor single-hole tap
    • Temperature controller
    • Infrared sensor electronics, programmable
    • Standpipe extension
    • 6 V axial solenoid valve with pre-filter
    • Flow regulator
    • Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
  • Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
  • 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
  • Fastening material for wash basin installation

Delivery data

  • Weight: 2,60 kg/Piece
  • Packing unit: 1

Technical data

  • Dimensions: w 254 mm x h 370 mm
  • Certificates: KIWA

Technical data

  • Measurement length: 150 - 450 mm
  • Material: Stainless steel 1.4404
  • Surface: Brushed stainless steel

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Certificates: PA-IX 29072/IO, Belgaqua, WRAS applied
  • Noise class: I
  • Flow class: O

Technical data

  • Setting options via SWS SSC
    • Sensor range (short/medium/long)
    • Programming via short range reflex (off/on)
    • Max. flow time (1-360 s)
    • Follow-up time (0.6-60 s)
    • Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
    • Duration of flow (off/15-600 s)
    • Energy saving mode (off/1-254 h after last flush)
    • Cleaning stop (off/60-360 s)
  • Setting options via short range reflex
    • Sensor range (short/medium/long)
    • Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
    • Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
    • Cleaning stop (off/60 s)
  • Flow: max. 5 l/min pressure independent
  • Flow pressure: 1.0 - 5.0 bar
  • Max. Resting pressure: 8 bar
  • Max. operating temperature: 70 °C (80 °C for thermal disinfection)
  • Material: Housing Brass; Parts in contact with water Plastic
  • Surface: Chrome
  • Connection: 2x G 3/8 IG
  • Certificates: PA-IX 29072/IO, Belgaqua
  • Noise class: I
  • Flow class: O
Filter categories
Finish
-
Stainless steel
Chrome
Chrome
System solutions
-
-
SWS Water Management System,
Single Control SSC
SWS Water Management System,
Single Control SSC
Connection
-
-
3/8"
3/8"
Function
-
-
Contact-free,
Self-closing electronic
Contact-free,
Self-closing electronic
Temperature
-
-
Cold water/pre-m. water
Mixed water
Watersaving
-
-
Start/stop function
Start/stop function
Hygiene
-
-
Stagnation flush
Stagnation flush,
Therm. disinfection
Energy supply
-
-
Battery mode
Mains mode
Pressure
-
-
High pressure / standard pressure
High pressure / standard pressure
Noises
-
-
Noise class 1
Noise class 1
Equipment
-
-
Backflow preventer,
Filter,
Flow restrictor
Backflow preventer,
Filter,
Flow restrictor
Safety class
-
-
EB
EB
4