Manual open/cold/hot actuation with clinic arm lever.

Extension when installation of the concealed WBW-SC-M masterbox is too deep.

Extension when installation of the concealed WBW-SC-M masterbox is too deep.

With COMFORT handle and grease chamber head part.

WC module, height 115 cm with concealed cistern 12 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

WC module, height 115 cm with concealed cistern 12 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted WC with 180 or 230 mm fastening dimension. Self-supporting, powder-coated steel profiled frame with height-adjustable feet. Saves water with dual flush and delayed filling process (saves about 0.5 l/flush). Flush triggering electronic or mechanical.

For LINUS W-E-V concealed wash basin taps. Electronic actuation. With sealed housing bushings and internal isolating valve.

Complete tap for subsequent installation. Frost-safe valve seat 200 mm from front edge of facade. Automatic ventilation of the inside pipe with each closing operation.

With COMFORT handle and grease chamber head part. For non-detachable, pull-proof and twist-proof installation into the QUICK adapter.

For securing valves/fittings.

For WBD-SC-M concealed masterbox. Manual actuation with automatic closing.

Compact single-lever mixer tap with design lever.

Compact single-lever mixer tap with lever.

Manual actuation with automatic closing. Easy flow time adjustment. Shower connection at bottom.

Aerator key for all SCHELL aerators and aerator inserts except XERIS and PURIS SC from 05/2024.

Manual open/closed actuation. Shower connection at bottom.

Manual open/closed actuation. Shower connection at bottom.

Three-jet hand shower with anti-limescale burls for VITUS shower kit.

For urinals supplied from the rear.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Outlet can be switched from shower head to hand shower. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

Triggering via CVD-Touch electronics with automatic closing. Battery operation. With integrated SWS BE-F VITUS wireless bus extender for networking with the SWS water management system.

The VITUS Bluetooth® module permits stagnation flushes by weekday and by time of day, as well as the triggering of thermal disinfections. Access to the SSC Bluetooth® module is protected by an access code that can be changed individually. These are documented and can be accessed. For the wireless parametrisation of SSC-capable VITUS fittings or for the optional extension of stagnation flushes. Access via SSC Bluetooth® app (can be downloaded from App Store, Play Store) and mobile Android or iOS devices.

Suitable for flush pipe Ø 15 mm and Ø 18 mm.

Wash basin mounting module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. For wall-mounted, barrier-free wash basins. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

With COMFORT handle. According to DIN 3227.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Manual single-lever actuation.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Made from a strong extruded aluminium profile with a high-quality, anodised finish. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

For WBW-E-V concealed masterbox. Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Scope of delivery

• Open/cold/hot exposed wash basin tap
• Ergonomic clinic arm lever 153 mm
• Open /cold/warm ceramic cartridge with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with Care flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,88 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,60 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,73 kg/Piece
• Packing unit: 1

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• ASAG easy (Self-sealing connection thread)
• Grease chamber head part
• Long push rod
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,47 kg/Piece
• Packing unit: 20

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• WC sound-insulation mat
• PE drain elbow Ø 90 / 90 mm, with construction plug
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• MONTUS wall bracket set (120-170 mm)

Delivery data

• Weight: 13,04 kg/Piece
• Packing unit: 1

Scope of delivery

• WC module
• WC concealed cistern 12 cm, actuation from front
• Angle valve with regulating function, G 1/2 AG, noise class I
• Flush pipe Ø 45 mm, with construction plug
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• PP drain elbow Ø 90/90 mm, with construction plug
• Reducer Ø 90 / 110 mm
• WC connection set (supply Ø 45 mm, drain Ø 90/110 mm)
• Fastening material for WC installation (fastening bolts M 12 x 200 mm, protection hoses, plastic collar bushings, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 12,72 kg/Piece
• Packing unit: 1

Scope of delivery

• Masterbox
• Roughing-in housing
• Concealed wash basin tap with isolating valve
• 6 V solenoid valve
• Pre-filter
• Backflow preventer (EN 1717: EB-type)
• Mount for wall outlet
• Flushing nozzle
• Flush-mounted cap

Delivery data

• Weight: 1,98 kg/Piece
• Packing unit: 1

Scope of delivery

• Frost-resistant outdoor tap
• Conduit with integrated valve seat
• Fitting housing with lockable head part and COMFORT operating handle
• Backflow preventer
• Anti-vacuum device
• Long valve shaft
• Hose screw connection
• Protective pipe
• Installation plug
• Cut-to-length gauges
• Anti-twist wall rosette with internal thread for outside wall
• Anti-twist wall rosette with internal thread for inside wall
• Fastening material

Delivery data

• Weight: 1,56 kg/Piece
• Packing unit: 8

Scope of delivery

• Combination angle valve
• 2 COMFORT handles
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Grease chamber head part
• Water stop unlocking element
• Hose screw connection
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,30 kg/Piece
• Packing unit: 1

Scope of delivery

• Spindle valve
• ASAG (Self-sealing connection thread)
• Cap with chain
• Hose screw connection

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 50

Delivery data

• Weight: 0,02 kg/Piece
• Packing unit: 25

Scope of delivery

• Front panel
• SC-M self-closing button with push sleeve
• Installation frame
• Fastening material

Delivery data

• Weight: 1,22 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever single-hole tap
• Single-lever mixer
• Ceramic cartridge with temperature lock 38° C, scald protection in case of cold water supply failure
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 440 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever single-hole tap
• Single-lever mixer
• Single-lever mixer ceramic cartridge with adjustable hot water and flow limitation
• Flow regulator
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 440 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,74 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,006 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower tap
• SC-M self-closing button
• Self-closing cartridge SC II with hot water restrictor
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 3,76 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever exposed shower tap
• Single-lever mixer
• Single-lever mixing ceramic cartridge with hot water and flow restrictor
• Valve (mechanical) for thermal disinfection (according to DVGW worksheet W 551)
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,03 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever exposed shower tap
• Single-lever mixer
• Single-lever mixing ceramic cartridge with hot water and flow restrictor
• 2 backflow preventers (EN 1717: EB-type)
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 3,99 kg/Piece
• Packing unit: 1

Scope of delivery

• Hand shower
• Water flow restrictor

Delivery data

• Weight: 0,23 kg/Piece
• Packing unit: 1

Scope of delivery

• Inlet pipe
• Connector Ø 32-38 mm

Delivery data

• Weight: 0,09 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,82 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• Shower head/hand shower tap changer
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Hand shower, 3-way adjustable and connection hose
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 13,40 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed wash basin tap
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• SWS BE-F VITUS wireless bus extender
• Solenoid valve 6 V automatic thermal disinfection with SWS (in accordance with DVGW worksheet W 551).
• 6 V solenoid valve with pre-filter
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 6 V battery compartment (integrated)
• 4x AA alkaline battery 1.5 V
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 5,48 kg/Piece
• Packing unit: 1

Scope of delivery

• SSC Bluetooth® module VITUS
• Integrated rechargeable battery for date/time reserve power

Delivery data

• Weight: 0,41 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,04 kg/Piece
• Packing unit: 1

Scope of delivery

• Wash basin mounting module
• Cross bar for wash basin attachment 40-375 mm, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for wash basin installation (fastening bolts M 12 x 110 mm, protection hose, nuts, flat washers, cover caps)
• Fastening material for installation feet

Delivery data

• Weight: 10,60 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,52 kg/Piece
• Packing unit: 1

Scope of delivery

• Angle valve
• COMFORT handle
• ASAG easy (Self-sealing connection thread)
• Long push rod
• High-tensile brass cone compression connection with length compensation
• Push rosette Ø 54 mm

Delivery data

• Weight: 0,13 kg/Piece
• Packing unit: 100

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,84 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,86 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Single-lever exposed wash basin tap
• Operating handle made from brass
• Single-lever mixing ceramic cartridge with hot water and flow restrictor
• 2 backflow preventers (EN 1717: EB-type)
• Pivoting outlet (lockable) with flow regulator
• 2 S-connections and rosettes (depth-adjustable)

Delivery data

• Weight: 4,95 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,01 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,64 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 250 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,72 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• LOW AEROSOL shower head, 20° ±6°, vandal-resistant
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 14,42 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Installation frame with infrared sensor electronics, programmable
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 1,64 kg/Piece
• Packing unit: 1

Technical data

• Flow: 7.5 - 9.0 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 210 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38239/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 25 mm

Technical data

• Material: Brass
• Surface: Chrome
• extension by: 50 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG), Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: PA-IX 026/IIA, DIN-DVGW applied, ACS, Belgaqua
• Noise class: II, at 100% flow
• Flow class: A

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear centre)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Dual flush: Eco flush volume 3 l, Main flush volume 4/5/6/7 l adjustable (6 l factory setting)
• Load capacity: max. 400 kg (when using MONTUS wall bracket set)
• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 90 /110 mm
• Flush pipe connection: Ø 45 mm
• Water connection: DN 15 R 1/2 AG (rear centre)
• Waste water outlet: Ø 90/110 mm
• Certificates: Belgaqua, NF

Technical data

• Flow at 3 bar: 15 l/min
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Plastic; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Dimensions: w 149 mm x h 138 mm x d 140 mm
• Installation depth: 100 - 124 mm
• Connection: G 1/2 IG
• Certificates: Belgaqua

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Matt chrome
• hole diameter: 38 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: P-IX 19319/II, DVGW, Belgaqua
• Noise class: II

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: QUICK plug-in technology DN 15
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: EB
• Certificates: PA-IX 008/IIA, ACS
• Noise class: II, at 100% flow
• Flow class: A

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 90 °C
• Material: Brass, conform to German drinking water regulations
• Surface: Brass
• Connection: DN 15 G 1/2 AG with ASAG
• Outlet: Hose screw connection Ø 14.5 mm (M 21 x 1.5)

Technical data

• Material: Brass, Plastic
• Surface: Brass
• Connection: G 3/4 IG

Technical data

• Material: Actuation Brass; Front panel Brass
• Surface: Actuation Chrome; Front panel Chrome
• Dimensions front plate: w 180 mm x h 188 mm x d 11.5 mm

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C
• Max. outlet temperature: 38 °C
• Material: Actuation Die-cast zinc; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29002/IO, DIN-DVGW, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Actuation Die-cast zinc; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29002/IO, DIN-DVGW, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Material: Die-cast zinc
• Surface: Matt chrome
• spanner size 4-sided: 5 mm

Technical data

• Running time: 5 - 30 s
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38241/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Material: Plastic

Technical data

• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38242/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)
• Certificates: PA-IX 38242/IB, Belgaqua
• Noise class: I
• Flow class: B

Technical data

• Jet types: Soft, Vital, Power
• Surface: Chrome
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• shaft diameter: 19 mm
• shaft length: 40 mm
• Connection: DN 15 G 1/2 AG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow: 1.0 - 5.0 l/min
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 19116/IZ
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• length shower hose: 1500 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 330 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Wireless standard: Bluetooth® SMART
• Frequency band: 2,4 GHz
• Max. Range: 10 m (depending on installation site and building materials)

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 50 mm
• Water connection: 2x DN 15 G 1/2 AG (bottom)
• Waste water outlet: Ø 50 mm/40 mm (by cutting to length)
• Water outlet: 2x DN 15 G 1/2 IG

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Brass
• Surface: Outlet Chrome; Front panel Chrome
• Outlet: L 110 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 AG with ASAG easy
• Outlet: Ø 10 mm (DN 10 G 3/8 AG)
• Certificates: P-IX 212/IA, DIN-DVGW, ACS, NF, WRAS applied
• Noise class: I
• Flow class: A

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Brass
• Surface: Outlet Chrome; Front panel Chrome
• Outlet: L 170 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Brass
• Surface: Outlet Chrome; Front panel Chrome
• Outlet: L 170 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Projection to centre of aerator: 270 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: PA-IX 38238/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Brass
• Surface: Outlet Chrome; Front panel Chrome
• Outlet: L 230 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm

Technical data

• Setting options via SWS SSC
• Programming via short range reflex (off/on)
• Sensor range (short/medium/long)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Shower head Brass, conform to German drinking water regulations; Housing Aluminium; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Shower head Chrome; Housing Brush anodised aluminium
• Dimensions: w 226 mm x h 1200 mm x d 115 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Front panel Stainless steel
• Surface: Outlet Chrome; Front panel Brushed stainless steel
• Outlet: L 170 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm