For building sealing of SCHELL masterboxes according to DIN 18534.

Connection cover for covering cold/hot water supply laid as exposed supply lines.

Manual open/closed actuation.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Expansion sleeve
• Adhesive tape

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Connection cover
• Fastening material

Delivery data

• Packing unit: 1

Scope of delivery

• Open/closed exposed shower tap
• Operating button open/close
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• IsoBody housing
• Open/closed ceramic cartridge
• 2 backflow preventers (EN 1717: EB-type)
• Hand shower with anti-limescale knobs, 3-way adjustable
• Shower hose with anti-twist protection
• 2 S-connections and rosettes (depth-adjustable)
• Shower bar (stainless steel)
• Fastening material

Delivery data

• Weight: 3,52 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Flexible Clean-Fix S connection hose, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,80 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,60 kg/Piece
• Packing unit: 1

Technical data

• Dimensions: w 254 mm x h 370 mm
• Certificates: KIWA

Technical data

• Measurement length: 150 - 450 mm
• Material: Stainless steel 1.4404
• Surface: Brushed stainless steel

Technical data

• Jet types: Soft, Vital, Power
• Max. operating temperature: 65 °C (for thermal disinfection 80 °C max. 10 min./day)
• Max. Outlet temperature: 38 - 43 °C adjustable
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome, Polished stainless steel
• length shower hose: 1500 mm
• length shower bar: 900 mm
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O