Easy-maintenance S-connections for all exposed VITUS fittings.

For a retrofit connection of an appliance to a pre-installed angle valve. With COMFORT handle and grease chamber head part. HD safety combination (EN 1717).

Vandal-resistant shower head, with adjustable tilt angle. Angled version minimises likelihood of use for suicide.

Solenoid valve can be retrofitted to the planned connection in a water path. Function: Hot water is routed to bypass the thermostatic valve. Selection is made by using the on-site connection (central building control system, key switch, etc.).

To replace the thermostat cartridge.

Grease chamber head part with snap-on bush and backflow preventer.

T-piece with union nut for quick installation.

For angle valves.

With shut-off and regulating function.

For connection to radiator valves.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

For converting from manual to electronic actuation.

Made from high-quality stainless steel (1.4404) material with a brushed finish. Integrated SCHELL shower fitting. Triggering via CVD-Touch electronics with automatic closing. Optional battery or mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Outlet can be switched from shower head to hand shower. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

Battery operation. Universal vandal-resistant flush control with corrosion-safe siphon with LC sensor. For all ceramic and stainless steel bowls. Plug + play plug connector, IP 54.

Mains operation. Vandal-resistant flush control with corrosion-safe siphon with LC sensor. For installation behind sanitary ceramics. Suitable for retrofitting existing systems with the following urinal ceramics: KERAMAG - Aller, Public Line, Renova VILLEROY & BOCH - Magnum, Subway, Arriba.

Contact-free infrared sensor flushing facility. For SCHELL COMPACT II concealed urinal flush valve. Mains operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Extension 40 mm, non-rising spindle.

40 mm cranked.

25 mm cranked.

Infrared sensor-controlled. Battery operation. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• 2 S-connections with isolating valve

Delivery data

• Weight: 0,23 kg/Piece
• Packing unit: 1

Scope of delivery

• Appliance valve
• COMFORT handle
• Backflow preventer (EN 1717: EB-type) in appliance connection outlet
• Anti-vacuum device (EN 1717: HB-type) in appliance connection outlet
• Hose screw connection
• High-tensile brass cone compression connection with length compensation

Delivery data

• Weight: 0,51 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 1,11 kg/Piece
• Packing unit: 1

Scope of delivery

• TD solenoid valve, 12 V monostable with connecting nipple and pre-filter
• Adapter cable

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,17 kg/Piece
• Packing unit: 1

Scope of delivery

• Sanitary head part
• Backflow preventer (EN 1717: EB-type)
• Snap-on bush

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 1

Scope of delivery

• T-piece

Delivery data

• Weight: 0,21 kg/Piece
• Packing unit: 25

Scope of delivery

• Backflow preventer
• Union nut G 3/8 IG
• High-tensile brass cone compression connection with length compensation

Delivery data

• Weight: 0,16 kg/Piece
• Packing unit: 1

Scope of delivery

• Concealed spindle valve
• COMFORT handle
• Non-rising head part
• Push rod
• Maintenance-free spindle seal
• Protective cap
• Push rosette Ø 65 mm

Delivery data

• Weight: 0,35 kg/Piece
• Packing unit: 20

Scope of delivery

• Connecting nipple
• ASAG easy (Self-sealing connection thread)

Delivery data

• Weight: 0,08 kg/Piece
• Packing unit: 10

Delivery data

• Weight: 0,006 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,37 kg/Piece
• Packing unit: 1

Scope of delivery

• CVD touch electronics
• Solenoid valve with adapter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Fastening material

Delivery data

• Weight: 0,70 kg/Piece
• Packing unit: 1

Scope of delivery

• Electronic self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• Shower head/hand shower tap changer
• CVD-Touch electronics, programmable, IP65 protection against low-pressure water jets
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 6 V solenoid valve
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Hand shower, 3-way adjustable and connection hose
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 13,40 kg/Piece
• Packing unit: 1

Scope of delivery

• E-module
• Solenoid valve with adapter
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Urinal siphon with LC sensor

Delivery data

• Weight: 0,60 kg/Piece
• Packing unit: 1

Scope of delivery

• E-module
• Waterpath with 6 V solenoid valve
• Concealed transformer 100-240 VAC, 50-60 Hz
• Isolating valve
• Special supply set with flush pipe connector
• Flexible hose
• Fastening material
• Urinal siphon with LC sensor

Delivery data

• Weight: 1,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• 6 V solenoid valve with pre-filter
• Installation frame with infrared sensor electronics, programmable
• Concealed transformer 100-240 VAC, 50-60 Hz

Delivery data

• Weight: 0,75 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,11 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,12 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• 6 V battery compartment, protection class IP65
• 4x AA alkaline battery 1.5 V
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,57 kg/Piece
• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Connection: DN 15 G 1/2 AG
• Outlet: G 3/4 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 10 G 3/8 IG
• Outlet: Hose screw connection Ø 14.5 mm (DN 20 G 3/4 AG), Ø 10 mm (DN 10 G 3/8 AG)
• Safety device, conforms to EN 1717: HD
• Certificates: DVGW, ACS, Belgaqua

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Housing Chrome
• Tilt angle: 14 - 26 °
• Connection: DN 15 G 1/2 AG

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Brass
• Connection: DN 10 G 3/8 AG
• Safety device, conforms to EN 1717: EB

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut DN 20 G 3/4 IG
• Outlet: DN 20 G 3/4 AG (bottom), DN 20 G 1/2 IG (right)

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: Union nut DN 10 G 3/8 IG
• Outlet: Ø 10 mm (DN 10 G 1/2 AG)
• Safety device, conforms to EN 1717: EB

Technical data

• Max. Operating pressure: 10 bar
• Max. operating temperature: 85 °C
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Installation depth: 0 - 40 mm
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 G 1/2 IG
• Certificates: P-IX 28893/II
• Noise class: II

Technical data

• Material: Pipe Copper; Screw nipple Brass
• Max. operating temperature: 90 °C
• Surface: Matt chrome
• length: 120 mm
• Connection: DN 15 G 1/2 AG
• Outlet: Ø 15 x 1 mm

Technical data

• Material: Die-cast zinc
• Surface: Matt chrome
• spanner size 4-sided: 5 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (4-120 s, 10 program stages)
• Stagnation flush (off/20 s, every 24 h)
• Surface: Actuation Chrome

Technical data

• Setting options via SWS SSC
• Actuation force (soft/medium/hard)
• Manual programming (off/on)
• Max. flow time (1-950 s)
• Stagnation flush (off/1-1000 s, every 1-250 h after last flush/every 1-250 h)
• Actuation timeout (off/1-255 s, timeout 1-2000 min)
• Setting options via manual programming
• Max. flow time (10-360 s in 10 program stages, factory setting 20 s)
• Stagnation flush (off/20 s, every 24 h)
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Housing Stainless steel 1.4404; Piping Plastic, conform to German drinking water regulations; Waterpath Brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Housing Brushed stainless steel
• Dimensions: w 240 mm x h 1200 mm x d 80 mm
• length shower hose: 1500 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Functions
• Stagnation flush (every 24 hours after last flush)
• Automatic stadium program (reduced flush volume with high usage frequency >2 users/5 min)
• Acoustic signal (when battery charge is low)
• Odour trap flush (when water level is low)
• Automatic flush stop (in case of blocked drain pipe)
• Setting options via Reedkontakt (accessories)
• Flush programs (1 l, 2 l, hybrid flush)
• Interval flush 5x (each flush 2 min contact time)
• Cleaning flush 10 s
• Cleaning stop 180 s
• Diagnostics program

Technical data

• Functions
• Stagnation flush (every 24 hours after last flush)
• Automatic stadium program (reduced flush volume with high usage frequency >2 users/5 min)
• Acoustic signal (when battery charge is low)
• Odour trap flush (when water level is low)
• Automatic flush stop (in case of blocked drain pipe)
• Setting options via Reedkontakt (accessories)
• Flush programs (1 l, 2 l, hybrid flush)
• Interval flush 5x (each flush 2 min contact time)
• Cleaning flush 10 s
• Cleaning stop 180 s
• Diagnostics program
• Material: Waterpath Plastic

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Flush time (1-15 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Pre-flush (off/1 s, lockout time 5-60 min after last flush)
• Automatic stadium program (off/1 s per user, main flush 20-60s after last use)
• Trap flushing (off/1-240 h after last flush)
• Energy saving mode (off/1-254 h after last flush)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Pre-flush (off/1 s)
• Automatic stadium program (off/1 s per user)
• Rap flush (off/on)
• Flush time (1-15 s)
• Material: Front panel Plastic
• Surface: Front panel Alpine white
• Dimensions front plate: w 124 mm x h 153.5 mm x d 12 mm

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Material: Copper
• Surface: Chrome
• length: 291 mm
• cranking: 40 mm

Technical data

• Material: Copper
• Surface: Chrome
• length: 293 mm
• cranking: 25 mm

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O