Made from a strong extruded aluminium profile with a high-quality, anodised finish. Manual actuation with automatic closing. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above. Solenoid valve for thermal disinfection with SWS integrated.

Made from a strong extruded aluminium profile with a high-quality, anodised finish. Manual actuation with automatic closing. Pivoting front panel for easy installation and servicing. Suitable for connections from rear or for exposed connections from above.

With dual lip seal.

Infrared sensor-controlled. Mains operation (concealed transformer). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Solenoid valve 12 V for manual thermal disinfection (according to DVGW worksheet W 551)
• Self-closing cartridge SC II
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• Shower head COMFORT Flex, adjustable angle of inclination 12 - 32°, vandal-resistant, with soft jet and anti-limescale knob
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 15,42 kg/Piece
• Packing unit: 1

Scope of delivery

• Self-closing exposed shower panel
• Operating button for thermostat with push sleeve, temperature setting unlockable/lockable at 38 °C
• SC self-closing button
• Self-closing cartridge SC II
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters
• LOW AEROSOL shower head, 20° ±6°, vandal-resistant
• Connection accessories with isolating valve(s)
• Fastening material for wall installation

Delivery data

• Weight: 15,50 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,34 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Concealed transformer 9 VDC, 100-240 VAC, 50-60 Hz
• Flexible Clean-Fix S connection hose, G 3/8 IG x 380 mm, with pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,38 kg/Piece
• Packing unit: 1

Technical data

• Running time: 5 - 30 s (20 s )
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Shower head Brass, conform to German drinking water regulations; Housing Aluminium; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Shower head Chrome; Housing Brush anodised aluminium
• Dimensions: w 226 mm x h 1200 mm x d 115 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Running time: 5 - 30 s (20 s )
• Flow: max. 9 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. operating temperature: 70 °C temporarily
• Material: Actuation Brass; Shower head Brass, conform to German drinking water regulations; Housing Aluminium; Waterpath Dezincification-resistant brass, conform to German drinking water regulations
• Surface: Actuation Chrome; Shower head Chrome; Housing Brush anodised aluminium
• Dimensions: w 226 mm x h 1200 mm x d 115 mm
• Connection: 2x DN 15 G 1/2 AG
• Certificates: Belgaqua

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: P-IX 9523-I
• Noise class: I