Grease chamber head part with snap-on bush and backflow preventer.

Urinal module, height 115 cm. For stud wall or pre-wall mounting or exposed installation. Self-supporting, powder-coated steel profiled frame with height-adjustable feet and cross bars. Prepared for the connection of exposed urinal flush valves.

Lockable. For protection against the unauthorised withdrawal of water. Suitable for all popular head parts with snap-on bush.

Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Infrared sensor-controlled. Mains operation.

Adjustable tilt angle. Vandal-resistant shower head, with soft stream and anti-limescale burls. Angled version minimises likelihood of use for suicide.

All-metal design with brass push button. Conform to DIN EN 12541. Single flush.

Manual open/closed actuation.

Thermostatic anti-scalding protection fitting incl. flexible connecting set for installation on angle valves with G 3/8 AG outlet. Setting of max. draw-off temperature, concealed under cover cap, only possible with tool.

Extension 40 mm, non-rising spindle.

Infrared sensor-controlled. Mains operation (transformer plug). Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC.

For WBW-E-M concealed masterbox. Infrared sensor-controlled. Excluding power supply. Suitable for networking with the SCHELL SWS water management system. Configurable via SCHELL Single Control SSC. Intended for power supply via SCHELL water management system SWS or central power supply unit.

Scope of delivery

• Sanitary head part
• Backflow preventer (EN 1717: EB-type)
• Snap-on bush

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 1

Delivery data

• Weight: 0,05 kg/Piece
• Packing unit: 1

Scope of delivery

• Urinal module
• Cross bar for urinal attachment 40-375 mm, height-adjustable
• Cross bar with noise-insulated fitting connection, with construction plug, height-adjustable
• Cross bar with drain elbow and construction plug, height-adjustable
• Galvanised, height-adjustable mounting feet 0 - 20 cm with slip resistance
• Fastening material for installation feet
• Fastening material for urinal installation (fastening bolts M 8 x 100 mm, protection hose, plastic collar bushings, nuts, flat washers, cover caps)

Delivery data

• Weight: 9,74 kg/Piece
• Packing unit: 1

Scope of delivery

• Lockable COMFORT handle
• Snap-on bush
• 2 keys (identical for all fittings)

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Infrared sensor electronics, programmable
• Standpipe extension
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 350 mm, with 3-pin plug connector, protection class IP65
• Flexible Clean-Fix S connection hose, G 3/8 IG x 500 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 2,33 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller with hot water restrictor
• Infrared sensor electronics, programmable
• 6 V solenoid valve with pre-filter
• Flow regulator
• Connection cable, 200 mm, with 2-pin plug, protection class IP65
• 2 flexible connection hoses, G 3/8 IG x 450 mm, with backflow preventer (DIN EN 1717: EB-type) and pre-filter
• Transformer plug 6 VDC, 100-240 VAC, 50-60 Hz
• Fastening material for wash basin installation

Delivery data

• Weight: 1,77 kg/Piece
• Packing unit: 1

Scope of delivery

• Shower head

Delivery data

• Weight: 0,50 kg/Piece
• Packing unit: 1

Scope of delivery

• Exposed WC flush valve
• Self-closing cartridge with automatic nozzle cleaning needle
• Push rosette Ø 60 mm
• Flush pipe connection with pipe interrupter

Delivery data

• Weight: 1,02 kg/Piece
• Packing unit: 1

Scope of delivery

• Open/closed exposed shower tap
• Operating button open/close
• ThermoProtect thermostat, conform to EN 1111, unlockable/lockable temperature lock at 38 °C, anti-scalding protection if cold water supply fails
• IsoBody housing
• Open/closed ceramic cartridge
• 2 backflow preventers (EN 1717: EB-type)
• Hand shower with anti-limescale knobs, 3-way adjustable
• Shower hose with anti-twist protection
• 2 S-connections and rosettes (depth-adjustable)
• Shower bar (stainless steel)
• Fastening material

Delivery data

• Weight: 3,52 kg/Piece
• Packing unit: 1

Scope of delivery

Angle valve thermostat (09 414 06 99)

• Angle valve thermostat
• ThermoProtect thermostat, conform to EN 1111, anti-scalding protection if cold water supply fails
• 2 backflow preventers (EN 1717: EB-type)
• 2 pre-filters

Connecting set for angle valve thermostat (04 116 06 99)

• T-piece with movable union nut G 3/8 IG
• Flexible Clean-Flex S hose with union nuts.

Delivery data

• Weight: 0,83 kg/Set
• Packing unit: 1

Delivery data

• Weight: 0,10 kg/Piece
• Packing unit: 1

Scope of delivery

• Infrared sensor single-hole tap
• Temperature controller
• Infrared sensor electronics, programmable
• 6 V axial solenoid valve with pre-filter
• Flow regulator
• Connection cable, 220 mm, with 3-pin plug connector, protection class IP65
• Transformer plug 9 VDC, 100-240 VAC, 50-60 Hz
• 2 flexible Clean-Fix S connection hoses, G 3/8 IG x 400 mm, with integrated backflow preventer (EN 1717: EB-type) and pre-filter
• Fastening material for wash basin installation

Delivery data

• Weight: 1,87 kg/Piece
• Packing unit: 1

Scope of delivery

• Front panel with infrared sensor window
• Mixed water operating button with push sleeve
• Installation frame with infrared sensor electronics, programmable
• Wall outlet with flow regulator (theft-safe)
• Fastening material

Delivery data

• Weight: 2,02 kg/Piece
• Packing unit: 1

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Brass
• Connection: DN 10 G 3/8 AG
• Safety device, conforms to EN 1717: EB

Technical data

• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: DN 15 G 1/2 IG
• Outlet: DN 15 G 1/2 AG
• Safety device, conforms to EN 1717: EB

Technical data

• Material: Frame Steel
• Surface: Frame Powder coat finish
• Dimensions: w 50 cm x h 115 cm
• Waste water connection: Ø 50 mm
• Water connection: DN 15 G 1/2 AG (bottom)
• Waste water outlet: Ø 50 mm
• Water outlet: DN 15 G 1/2 IG

Technical data

• Surface: Chrome

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Connection: G 3/8 IG
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via short range reflex
• Sensor range area (approx. 2-17 cm)
• Stagnation flush (off/duration of flow 30 s, 24 h after last use)
• Cleaning stop (off/120 s)
• Flow: max. 1 gpm ≈ 3,8 l/min
• Flow pressure: 0.5 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (temporarily, e.g. for thermal disinfection)
• Material: Brass, conform to German drinking water regulations
• Surface: Chrome
• Connection: 2x G 3/8 IG
• Certificates: P-IX 29853/IO, WRAS applied
• Noise class: I
• Flow class: O

Technical data

• Flow: max. 9 l/min pressure independent
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome
• Tilt angle: 12 - 32 °
• Connection: DN 15 G 1/2 AG
• Certificates: P-IX 29941/IZ, DIN-DVGW, ACS, WRAS
• Noise class: I
• Flow class: Z

Technical data

• Flow pressure: 1.2 - 5.0 bar
• Single flush: 4.5 - 9.0 l
• Flush flow: 1.0 - 1.3 l/s
• Material: Housing Brass; Parts in contact with water Brass, conform to German drinking water regulations, Plastic
• Surface: Chrome
• Connection: DN 20 G 3/4 AG
• Flush pipe connection: Ø 26 mm
• Certificates: PA-IX 9901/II, DIN-DVGW, Belgaqua
• Noise class: II, at 100% flow

Technical data

• Jet types: Soft, Vital, Power
• Max. operating temperature: 65 °C (for thermal disinfection 80 °C max. 10 min./day)
• Max. Outlet temperature: 38 - 43 °C adjustable
• Material: Housing Brass, conform to German drinking water regulations
• Surface: Chrome, Polished stainless steel
• length shower hose: 1500 mm
• length shower bar: 900 mm
• Connection: 2x DN 15 G 1/2 AG
• Outlet: DN 15 G 1/2 AG (bottom)

Technical data

Angle valve thermostat (09 414 06 99)

• Material: Cover cap Plastic; Housing Brass, conform to German drinking water regulations
• Thermal disinfection: possible, after releasing the temperature lock
• Flow at 3 bar: 13 l/min
• Max. operating temperature: 63 °C (70 °C for a short time for thermal disinfection)
• Max. Outlet temperature: 33 - 50 °C adjustable (38 °C ± 2 K )
• Surface: Chrome
• Connection: G 3/8 IG, G 3/8 AG
• Outlet: G 3/8 AG
• Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS
• Noise class: I, at 100% flow

Connecting set for angle valve thermostat (04 116 06 99)

• Surface: Chrome
• Connection: G 3/8 IG

Certificates: P-IX 29876/I, DIN-DVGW, ACS, Belgaqua, WRAS

Noise class: I, at 100% flow

Technical data

• Material: Brass
• Surface: Chrome

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Housing Brass; Parts in contact with water Plastic
• Surface: Chrome
• Certificates: PA-IX 29072/IO, Belgaqua
• Noise class: I
• Flow class: O

Technical data

• Setting options via SWS SSC
• Sensor range (short/medium/long)
• Programming via short range reflex (off/on)
• Max. flow time (1-360 s)
• Follow-up time (0.6-60 s)
• Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/15-600 s)
• Duration of flow (off/15-600 s)
• Energy saving mode (off/1-254 h after last flush)
• Cleaning stop (off/60-360 s)
• Setting options via short range reflex
• Sensor range (short/medium/long)
• Stagnation flush (off/30 s, every 24 h after last flush/every 24 h)
• Continuous flush for thermal disinfection, with anti-scalding protection (off/300 s/120 s)
• Cleaning stop (off/60 s)
• Flow: max. 5 l/min pressure independent
• Flow pressure: 1.0 - 5.0 bar
• Max. Resting pressure: 8 bar
• Max. operating temperature: 70 °C (80 °C for thermal disinfection)
• Material: Outlet Brass, conform to German drinking water regulations; Actuation Brass; Front panel Stainless steel
• Surface: Outlet Chrome; Actuation Chrome; Front panel Brushed stainless steel
• Outlet: L 230 mm
• Dimensions front plate: w 188 mm x h 180 mm x d 12 mm